To The Lower

48 States

In Stock

Fuel Tank Skid Plate For 2010-2024 4Runner

Before you hit the rough terrain, protect your vehicle with a Fuel Tank Skid Plate that can take a hit and is built to last through the toughest conditions. Guarding the underside of your outfitted off-road vehicle as you adventure in the great outdoors, these skid plates are custom-made to fit your vehicle so you can focus on the trail ahead.

Choose from RAW or Powder Coat depending on your desired look and use.


  • 100% bolt-on option, no modification required. 
  • The finish of choice, mix and match, no rules. 
  • Available in 3/16 Steel and 1/4 Aluminum
  • Easy installation, read our installation instructions or watch the installation video below for a step-by-step guide. 
  • Crafted by American Welders, professional finishes to protect from any corrosion, with the chosen finish.

Crafted from American 3/16 Steel or 1/4 5052 aircraft-grade aluminum, we give you the choice to focus on strength or weight, without a lot of compromises. Our choice of 5052 aluminum makes for a lightweight option with more strength than the other options on the market. The Fuel Tank skid plate is 100% bolt-on and is installed with zero modification to your truck. Using a combination of factory hardware and grade 8 hardware for high-quality fit. 

        Read More

        Starting At

        • Fuel Tank Skid Plate For 2010-2024 4Runner 
          Material /
          Finish /
        • Catalytic Converter Shield For 2010-2024 4Runner - $189.99 / CR3896
        • Front Skid Plate For 2010-2024 4Runner
        • Transmission Skid Plate For 2010-2024 4Runner
        • Transfer Skid Plate For 2010-2024 4Runner
        • Lower Control Arm Skid Plate For 2010-2024 4Runner - $189.99 / CR3680
        Subtotal: $

        Will the Cali Raised skids work with the TRD skid plate?

        Yes and No. The transfer case, LCA, shock skid, and fuel tank skid will work with the TRD pro skid. The front and transmission skids will not.

        Does the transfer case skid protect the catalytic converter from theft?

        Not a guarantee, but it will make it more difficult for thieves to fit cutting tools in that area. But these were not designed for theft prevention. The transmission skid covers 50% of the catalytic converter.

        Are they bolt-on, or do they require modification?

        Yes, they are 100% bolt-on. You will have to remove some factory items, but they use all existing bolt holes. You can go back to stock at any time.

        What types of material are the skid plates made from?

        The front, transmission, transfer case and fuel skids are all made from either 3/16” thick steel, or 1/4” 5052 aluminum. 100% MADE IN USA, Fort Worth, Texas.

        For the fuel tank skid, will I need TRD Off-Road fuel tank straps?

        Yes, you will. They are designed to use the 4 factory bolts that come with the TRD Off-Road straps. The factory plastic gas tank is susceptible to gouging and slicing. That is what the skid plate protects. However, the tank is also a very thick plastic as is very strong and with the skid plate attached, it can handle a lot of weight.

        None necessary - you will be using your factory hardware.

        Optional TRD OR Fuel Tank Straps are required if you do not have the TRD Tank straps.
        Front Strap - Toyota Part Number 77602-04020
        Rear Strap - Toyota Part Number 77601-04020

        37.9 lbs

        16 lbs