Tacoma Stealth Front Bumper Cali Raised LED

Cali Raised LED Stealth Bumper Stands Alone.

Cali Raised LED has been teasing for a few months now that we have a new bumper for Tacoma on the way. What are the features, what makes it so special, and when can you expect to see it ready for purchase? Find out more below!


The protection component is one of the most important features of investing in a front bumper. Off-road bumpers protect against dangerous rocks and trail obstacles, increase your vehicle’s approach and departure angles, and create many more recovery solutions when needed. Not only that, but they also protect your vehicle’s lights, radiator, and vital engine components from damage. This type of bumper is a great investment not only for the added protection but also to enhance the overall appearance of your truck. The design is no exception when it comes to keeping it sleek and subtle without compromising on durability and performance. With all that in mind, bumpers are considered standard safety equipment for off-roading adventures. Additionally, having a bumper allows you to keep your family and rig safe due to the added ability to recover from tough situations with winches and very strong recovery points.

What models will it fit? Toyota Tacoma 2016+. Our 4Runner friends will be happy to know that we are aiming to serve the 4Runner community next!


What makes this bumper better than C4 or CBI? Or anyone else's for that matter? It is lightweight but incredibly strong, with strength in the places you need it, and no extra bulk to slow you down. While other offerings on the market support the installation of one single row LED, our new bumper allows not only the use of single row LEDs but also dual row LED lights. Not only that, but it also allows you to install two dual row LEDs instead of one, allowing you to light it up when you need it the most. It will accommodate d-rings and a winch right out of the box - but the best part about the winch installation is that we include a winch controller relocation bracket for easy installation and use. How many riders have you run into that have a winch, but haven’t properly installed it yet? You won’t be seeing that with this bumper design. Our engineer made it far too easy and now you can do all the installation in one go.


What should people expect to pay? We can’t give out all the secrets just yet - however - the price point will be very competitive. Not only that, but the shipping is going to be extremely simple as well, this product comes in a box via UPS, and at a flat rate. No freight to schedule or having to go to the freight terminal to get this bumper home.

What are the best things about this bumper? While there are more than 3, we have listed some of the features we are most proud of below.


1. Fits like a glove. The design hides the bumper trim instead of using edge trim to cover up cut areas. You will be impressed and heck, your truck might even thank you for making it look so snazzy.


2. Optimization of Materials: Another great feature is the allocation of the right materials in the right places. One of the reasons bumpers are so heavy is the thickness of the steel. Instead of making this bumper out of the same thickness, we opted to optimize the placement so it will perform to the highest standards and get that lightweight feature. The design utilizes 1/4" and 3/16" thick steel in the places that need it, and lighter ⅛” materials in the places that don't. This allows you to keep those precious MPGs up where you need them.


3. Lighting: This bumper expands the lighting options for the low-profile bumpers out there. It will fit 2ea 32" dual row LEDs. If you are running the Cali Raised LED 32” dual rows, that is over 60,000 lumens and 600 watts of total lighting in this very small package. Minor trimming and no obnoxious plastic trim are required to hide the cutting. Fits up to 12,000lb winches. 3/4" D-Ring mounts. The winch controller relocation bracket is included for easy installation and use.

What's the build quality? As mentioned previously, the utilization and optimization of where to place the varying material types are some of the best features of this bumper. Combine the right materials with the right processes, and you end up with a beautiful and strong bumper. Every piece is precision laser cut, press broke to very high tolerances, and is welded by one of our high precision weld robots ensuring that it not only looks great but is built to a standard that most cannot achieve.


What material is this made out of? ¼”, 3/16”, and 10GA steel plate. 1.75x0.120 DOM tubing


What problem does this solve that others don't? This product provides all of the benefits of others on the market while allowing you to add 3x the amount of LED lighting output. It also makes the installation of the winch and wiring much easier and cleaner allowing you to enjoy all the features of the bumper without all the headaches of figuring out the extra details, we do the work for you. Keeping everything behind the bumper and body makes it very clean and stealthy while packing a big punch of function.

Most importantly, when will this thing be ready to ship to your door? Our target is within the next 3 months, taking into account all the supply chain madness we will do our best! Wanna know when it’s ready? Sign up for our newsletter and be the first to know when these are officially ready for the market.

In summary, this bumper is going to shake a few things up in the off-roading and overlading marketplace. We can’t wait to share it with you.



Questions? Start a chat. Comments? Speak your mind in the comments below.

THERE ARE 11 COMMENTS ON THIS ARTICLE

  • Looks amazing. Love the combination of features.

    John Hill 05/02/2022 at 10:13 PM
  • Looks awesome!

    Owen Gerrits 04/27/2022 at 11:35 AM
  • Looks great!

    Troy Poe 04/27/2022 at 07:14 AM
  • Great looking product. I have a front hitch, will this still fit?

    Simon Carey 04/14/2022 at 04:56 PM
  • I am looking forward for this bumper for my Tacoma I will add the feature for the winch plus the light bar it looks awesome

    Glen Hammel 04/12/2022 at 06:01 AM
  • Can’t wait to be able to make this upgrade to my truck, just wish they could be sent to Germany.

    James Hooser 03/27/2022 at 03:04 AM
  • Thanks for the info! This is the bumper I will be adding to my rig

    Dylan Fortnat 03/23/2022 at 08:13 AM
  • I have been looking for a bumper for a long time, this is exactly what i was looking for!!! Can’t wait to get this!!! Super excited, way to go Cali Raised for building this!!!!

    Elmer 03/21/2022 at 04:06 PM
  • How can I put my name on the list to get this?

    Emre Gundogdu 03/17/2022 at 04:53 PM
  • Can’t wait!!!

    Emre Gundogdu 03/17/2022 at 04:50 PM
  • This bumper looks awesome. Can’t wait to see it in action

    John Daley 03/10/2022 at 11:12 AM

LEAVE A COMMENT HERE