Overland Bed Rack For 2024+ Toyota Tacoma

Fits

2024+ Toyota Tacoma, 4th Gen

• Compatible years: 2024, 2025, 2026, 2027 Toyota Tacoma
• Compatible trims: SR, SR5, TRD PreRunner, TRD Sport, TRD Off-Road, Limited, Trailhunter, TRD Pro, and all other 2024+ Toyota Tacoma trims
• Make: Toyota
• Model: Tacoma
• Generation: 4th Gen Tacoma
• Bed compatibility: Available for both 5-foot short bed and 6-foot long bed Tacoma models.
• Factory bed rail compatibility: Designed to bolt directly to the factory bed rails.
• Trailhunter compatibility: Complete replacement for the Trailhunter factory ARB-style bed rack setup.
• Older Tacoma compatibility: This rack is designed for 2024+ Tacoma models only. For 2005–2023 Tacoma models, use the compatible 2005–2023 Tacoma bed rack listing.
• Tonneau cover compatibility: Not compatible with tonneau covers, including retractable covers such as Retrax XR or Pace Edwards.
• Camera visibility: The Tall 17.5-inch bed rack may block the digital rearview mirror camera or bed camera. The Low Profile 7-inch and Mid 10-inch rack options are not expected to block camera visibility.
• Factory feature compatibility: Does not interfere with factory tie-downs, bed lights, power outlet, tailgate, or bed storage compartments.

• Installation type: 100% bolt-on installation.
• Mounting location: Bolts directly to the factory bed rails.
• Drilling, cutting, or trimming required: No drilling, cutting, or trimming required.
• Install difficulty: Easy to moderate installation.
• Estimated install time: Approximately 45 minutes to 1 hour.
• Installer recommendation: Can be installed by one person, but a second person can make positioning easier.
• Tools needed: 3/16-inch Allen wrench, 5/32-inch Allen wrench, ratcheting wrench, and 1/2-inch box-end wrench.
• Hardware included: Yes. Includes 5/16-inch bolts, T-nuts, lock nuts, washers, and required mounting hardware.
• Instructions included: Written instructions and install video available.
• Material: 80% aluminum and 20% steel where strength matters most.
• Rack height options: Low Profile 7-inch, Mid 10-inch, and Tall 17.5-inch.
• Height guidance: Low Profile is best for daily driving and reduced wind drag. Mid is recommended for rooftop tents because it keeps the tent closer to the cab roofline. Tall gives the most bed access, storage underneath, and room for additional side MOLLE panels.
• Static weight capacity: 1,500 lbs tested, with 750 lbs recommended.
• Dynamic weight capacity: 400 lbs recommended.
• Rooftop tent compatibility: Designed to support a rooftop tent with people inside while parked.
• Accessory mounting: Includes MOLLE panels with built-in RotopaX mounting holes. Supports MAXTRAX, ActionTrax, awnings, jacks, shovels, axes, fire extinguishers, lighting, camp boxes, and other overland gear.
• Tonneau cover compatibility: Not compatible with tonneau covers.
• Shipping format: Ships unassembled and requires assembly.
• Warranty: Lifetime warranty against manufacturer defects.

• Overland bed rack
  
• MOLLE panels
  
• Mounting hardware
  
• Written installation instructions
  

Bed length selected: 5-foot short bed or 6-foot long bed depending on selected option.

Rack height selected: Low Profile 7-inch, Mid 10-inch, or Tall 17.5-inch depending on selected option.

Accessories: RotopaX, MAXTRAX, ActionTrax, recovery boards, awnings, jacks, shovels, axes, fire extinguishers, rooftop tents, lights, and camp boxes sold separately unless otherwise selected or bundled.

Q: Will this bed rack fit my 2024+ Toyota Tacoma?
A: Yes. This bed rack is designed for 2024+ Toyota Tacoma models, including 2024, 2025, 2026, and 2027.

Q: Does this fit both short bed and long bed Tacoma models?
A: Yes. This rack is available for both 5-foot short bed and 6-foot long bed Tacoma models.

Q: Does installation require drilling or cutting?
A: No. This bed rack bolts directly to the factory bed rails with no drilling, cutting, or trimming required.

Q: What rack height should I choose?
A: Low Profile 7-inch is best for daily driving and lower wind drag. Mid 10-inch is recommended for rooftop tent setups. Tall 17.5-inch gives the most bed access, storage space underneath, and room for additional side MOLLE panels.

Q: What is the weight capacity?
A: The rack has been tested to 1,500 lbs static capacity, with 750 lbs recommended static capacity. Dynamic weight capacity is 400 lbs recommended.

Q: Can this bed rack support a rooftop tent?
A: Yes. This bed rack is designed to support a rooftop tent with people inside while parked.

Q: Can I mount RotopaX, MAXTRAX, awnings, and trail gear?
A: Yes. The included MOLLE panels feature built-in RotopaX mounting holes and support MAXTRAX, ActionTrax, awnings, lights, jacks, shovels, axes, fire extinguishers, camp boxes, and other overland accessories.

Q: Does this rack work with tonneau covers?
A: No. This bed rack is not compatible with tonneau covers because it mounts to the factory bed rails.

Q: Does it block the camera?
A: The Tall 17.5-inch bed rack may block the digital rearview mirror camera or bed camera. The Low Profile 7-inch and Mid 10-inch rack options are not expected to block camera visibility.

Q: What is included?
A: This listing includes the overland bed rack, MOLLE panels, mounting hardware, and written installation instructions.