NOTE: Our Brite Box Fogster for 2020 Toyota Tacoma currently only works with halogen bulbs from the factory.
Designed for safer night time driving. Perfect for dark roads, off-road, and rural areas!
Before Brite Box:
Low beams/fog lights shut OFF when high beams are on.
After Brite Box Fogster:
Fog lights will turn ON when high beams are on
After Brite Box Fogster install your lights will function as follows:
Low Beams Only- Only Low Beams will be on
Fog Lights Only- Only Fog Lights will be on
Low Beams & Fogs- Only Low Beams & Fogs will be on
High Beams - Fog Lights will automatically be on with High Beams using your factory switch. If low beams stay on with high beams by default from the factory, those will remain on.
Once installed, Brite Box Fogster is FULLY AUTOMATIC with no additional switches or controls to operate, but by using your existing factory high beam switch
Instruction for install:
Finish installation in 30 minutes or less with model-specific step-by-step instructions. Works with stock headlamps and fog lights. No wire cutting!
The Brite Box is installed underneath the hood. You'll have to find a location to mount Brite Box. Make sure the car's headlight and fog light plug can reach the female plug of Brite Box and that Brite Box's male plug can reach the headlight and fog light bulb. The positive red wire (with attached fuse holder) of Brite Box must also be able to reach a positive (+) battery cable.
Kit includes Brite Box, wire ties, fuses, and alcohol pads to clean the surface when using applied double stick tape. Mounting options: Double-stick tape or supplied mounting screws.
The Brite Box, Bulbzilla Kits, and Heavy Duty Relay & Wiring Harnesses can be used together and with most LED and HID headlight bulbs as long as the headlight bulbs utilized are the same “style” as the factory bulbs (H4, H9, H11, etc). It can also be used with aftermarket headlights as long as the aftermarket headlights plugs directly into your factory harness.