10% OFF SALE

FREE SHIPPING

ON ALL PRODUCTS

To The Lower

48 States

Anytime Backup and Front Camera Kit Fits 2014-2019 Toyota Tacoma/4Runner/Tundra

Our Anytime Backup and Front Camera kits allow you to view your rear camera at any time AND add a front-facing camera. The harnesses will plug directly into the back of your factory in-dash screen with no cutting or modification to the factory wires required! Once the harnesses are plugged in, simply connect the wires from the harness to our factory-style switch! The switch is the 'small' OEM Style switch and it features a fully controllable and dimmable backlight.

Read More
ON SALE

$179.10 $199.00

Included
Compatibility
Premium Camera
Installation Instructions
  • 1x - Anytime Backup Camera Override Harness (Orange and Red Wires)
  • 1x - Anytime Backup Camera RCA video harness (Two Yellow RCA MF)
  • 1x - RCA Video switching relay (Three Yellow RCA MFF and Green/Black wires)
  • 1x - OEM Style Single Pole Double Throw (SPDT) Front/Rear Switch with Harness*
  • 1x - Front/Rear facing Camera
  • Works with 4runners, Tacoma, Tundra, and more!
  • 2014-2019 4Runner, Tacoma, Tundra
  • 2017-2019 Highlander
  • 2014-2017 Camry (2018+ models should purchase our 2020 style kit)


    Note:
  • Our switch is the 'Small' OEM Style Switch for an opening measuring 1.28" X 0.87".
  • This will not fit in the Taller Slim Openings.
  • This kit is designed for 2014-2019 Toyota vehicles. If you have a newer model with a 360-degree camera system then this will not work for you.

The Premium Camera is offered due to popular demand for a higher quality camera. This camera is made by Natika (A very popular camera sold on Amazon). The camera can be mounted either Vertically or Horizontally which will give you more flexibility when finding a place to mount your camera. The camera also comes with three wedges which will allow you to change the viewing angle of the camera, again giving you more control of your installation.

Vertical Mount

Horizontal Mount

The camera will have three wire loops on the camera wire, Green, White, and Purple. Cutting the wires will do the following:

  • Green - Remove Guidelines
  • White - Mirror Image (For Front Facing applications)
  • Purple - Flip Image (For Horizontal mounting)
  • DO NOT CUT the wire loops until you have the camera connected, powered up, and displaying on the screen.

Please see the link below for information on our cameras
anytime_backup_camera_-_install_instructions.pdf

RECENTLY VIEWED ITEMS