2010-2022 Toyota 4Runner Trail Edition Bolt On Rock Sliders
We do the best to estimate lead times but these times are estimates and are subject to change due to the influx of orders. If you have a question or need confirmation of a lead time prior to ordering please reach out on our chat.
Before you hit the rough terrain, protect your vehicle with a set of Cali Raised LED rock sliders - built to last through the toughest conditions. Guarding the underside of your outfitted off-road vehicle as you adventure in the great outdoors, these rock sliders are custom made to fit your vehicle so you can focus on the trail ahead.
Crafted from American 1.75" DOM tubing, we don't up-charge you for better material or for features like kick-outs. The slider wall thickness is .120" thick. Includes Grade 8 hardware you need for installation.
Choose between kick-out or no-kick out, from RAW, Powder Coat, and Bedliner finishes. More options than any other supplier on the market!
Features:
- 100% bolt-on option, no modification required.
- The finish of choice, mix and match, no rules.
- Easy installation, read our installation instructions (DCLB, DCSB, or AC) or watch the installation video below for a step-by-step guide.
- Crafted by American Welders, professional finishes to protect from any corrosion, with the chosen finish.
- 2010-2013 4Runners must remove Rock Trim Panel for sliders to fit properly.
Cancellation of a slider order will incur a 15% cancellation fee after the order is placed.
See important information about shipping options.
Read More
Starting At
$769.99
Rock Sliders
What's Trail Edition?
Kick-out vs No Kick-out
Bedliner vs Powder Coat vs RAW
Important Notes
Shipping *MUST READ*
Warranty & Cancellation
Our trail edition sliders tuck up close at 20 Degrees, to protect your vehicle from damage during your adventuring.
This is not meant to be a step.
Our sliders are rated to support the entire weight of the vehicle. This option also adds more of a step to access the rear of the vehicle.
Kick-Out:
Kick-out protects the backside of your vehicle from getting pinned by pushing the back tire away from an obstacle. The entire slider at any point can act as a pivot point. Our sliders are rated to support the entire weight of the vehicle. This option also adds more of a step to access the rear of the vehicle.
No Kick-Out
No kick-out is great for tighter trails where you don’t plan on using your vehicle as a pivot. This is also great general protection to the rocker panel of your vehicle. Our sliders are rated to support the entire weight of the vehicle.
Bedliner
Bedliner finish has a grip-like texture to aid in creating a non-slip surface. This has a rugged and textured look and feel.
Powder Coat
A powder-coated surface will be more resistant against scratches, chipping, wear, and fading compared to other types of finishes.
RAW
The best option for custom paint jobs and or if you have your own ideas for finishing them up!
NOTE: Due to the nature of manufacturing and shipping, there is a possibility of minor defects, discolorations, and imperfections. See SHIPPING for more info.
- Cancellation of a slider order will incur a 15% cancellation fee after the order is placed.
- Not compatible with X-REAS suspension components.
- 2010-2013 4Runners must remove Rock Trim Panel for sliders to fit properly.
- Minimalist design with all protections necessary to off-road any double black diamond.
Pick your finish for your filler plate, choose from Bedliner, powder coat, or raw.
Specs:
- Length 64".
- Wall Thickness .120”.
- Combined Weight: Approx 100 lbs.
While we make every attempt to properly package each product that leaves our facility, on occasion product does get damaged – a forklift mishap, mishandled pallet or box, or a delivery driver who is having a bad day.
If this happens please CONTACT US IMMEDIATELY!
Then follow these steps:
DO NOT ACCEPT ANY DELIVERY without WRITING DOWN THE DETAILS OF THE DAMAGE on the delivery form FIRST with the driver present.
Shipping companies will not satisfy an insurance claim without the damage noted by the customer.
We cannot be held responsible for any product or powder coating damages incurred during transit. We will facilitate however a claim, on the customer’s behalf with the carrier, but it is subject to the above annotations being made on the delivery slip and approval by the carrier.
OPTION 1
If the damage is bad and it is obvious the products inside the package are damaged, DO NOT SIGN for the item and REFUSE THE DELIVERY.
If you sign, the package is yours and you’ve accepted it as is.
OPTION 2
After inspecting the shipment, you can NOTE DAMAGE on delivery slip and then sign for the delivery.
By signing and accepting the shipment at this point you agree to go through the claims process with our help and it will be your responsibility to fix the product on your own effort. (Any awarded claim money will be sent to the customer as reimbursement for shipping damage)
SHIPPING OUTSIDE THE U.S.A.
Your country may require you to pay import fees, customs, broker fees, duties and/or value-added taxes (VAT). These costs are not included in the live shipping rate quoted during checkout. These potential charges are the sole responsibility of the customer.
Warranty: Cali Raised LED provides a 2-year warranty on all our products. Limited warranty on third party products, contact us directly for details.
Cancelation: Cancellation of a slider order will incur a 15% cancellation fee after the order is placed.