Step Edition Bolt On Rock Sliders For 2003-2009 Toyota 4Runner

Fits

2003–2009 Toyota 4Runner

• Compatible years: 2003, 2004, 2005, 2006, 2007, 2008, 2009 Toyota 4Runner
• Compatible generation: 4th Gen Toyota 4Runner

Compatibility:

• Make: Toyota
• Model: 4Runner
• Vehicle compatibility: Designed specifically for 2003–2009 Toyota 4Runner models.
• KDSS compatibility: Yes
• Non-KDSS compatibility: Yes

Important fitment notes:

• Not compatible with X-REAS suspension components.
• Not compatible with 4Runner Limited.
• Not compatible with Lexus GX.
• Fitment is not guaranteed on 2010+ 4Runner models or other vehicles unless otherwise specified.
• Always confirm your trim and suspension configuration before ordering.

• Installation type: 100% bolt-on installation.
• Drilling or cutting required: No drilling or cutting required.
• Install difficulty: Easy to moderate installation.
• Estimated install time: Approximately 1.5 to 2 hours.
• Hardware included: Grade 8 hardware included.
• Material: 1.75-inch DOM tubing.
• Wall thickness: .120-inch seamless wall.
• Mounting design: Full frame plate design with front and rear clamping support.
• Construction: Full gusseted rock slider construction
• Weight: Approximately 45 lbs each / 90 lbs per pair.
• Top plate options: Available with top plates or no top plates.
• Kick out options: Available with kick out or no kick out.
• Finish options: Raw steel, BK59 powder coating, or polyurethane bed liner spray.
• Raw steel: Best for custom paint or custom finishing.
• BK59 powder coat: Clean black finish with strong resistance against scratches, chipping, wear, and fading.
• Polyurethane bed liner spray: Rugged, textured finish with added grip, especially useful when paired with top plates.

Both the Step Edition and Trail Edition are built as true frame-mounted rock sliders for the 2003–2009 Toyota 4Runner. The main difference is whether step usability or tighter fitment is the bigger priority.

Choose Step Edition if you want:

• A more step-friendly slider design
  
• Top plates included
  
• Better step usability
  
• Easier entry and exit
  
• Better footing for passengers and daily use
  
• A better setup for daily driving and everyday access
  

Choose Trail Edition if you want:

• A 20-degree Trail Edition profile
  
• A closer-in rock slider setup
  
• No top plates
  
• A slider that sits tighter to the vehicle
  
• A more trail-focused design
  
• A setup built more around clearance and protection
  

Quick comparison:

Step Edition is best for daily use and easier step function. Trail Edition is best for a tighter-to-body profile and more trail-focused use.

If you want the slider to sit closer in and prioritize a cleaner trail profile, the Trail Edition is the better fit. If your 4Runner sees more daily driving and general-use duty, the Step Edition may be the better option.

• Driver-side Step Edition rock slider
• Passenger-side Step Edition rock slider
• Grade 8 installation hardware
  
  Selected slider option: Kick out or no kick out depending on selected option.
  
  Selected top plate option: Top plate or no top plate depending on selected option.
  
  Selected coating: Raw steel, BK59 powder coat, or polyurethane bed liner spray depending on selected option.

Q: Will these rock sliders fit my 2003–2009 Toyota 4Runner?
A: Yes. These Step Edition Bolt On Rock Sliders are designed for 2003–2009 Toyota 4Runner models.

Q: What 4Runner generation do these fit?
A: These sliders fit 4th Gen Toyota 4Runner models from 2003 through 2009.

Q: Are these compatible with X-REAS?
A: No. These sliders are not compatible with X-REAS suspension components.

Q: Do these fit the 4Runner Limited?
A: No. These sliders are not compatible with the Toyota 4Runner Limited.

Q: Are these compatible with Lexus GX?
A: No. These sliders are not compatible with Lexus GX.

Q: Do these fit KDSS and non-KDSS 4Runners?
A: Yes. These sliders are listed as compatible with both KDSS and non-KDSS 4Runner models.

Q: What is the Step Edition design?
A: The Step Edition uses a step-friendly profile and is available with top plates for added daily usability.

Q: Do these 4Runner rock sliders work as a step?
A: Yes. The Step Edition is available with top plates for better step usability. You can also choose no top plates if you prefer a cleaner slider setup.

Q: Are these true rock sliders or just side steps?
A: These are true frame-mounted rock sliders built for rocker panel protection and trail use, not just cosmetic side steps.

Q: Are these bolt-on rock sliders?
A: Yes. These are 100% bolt-on rock sliders and require no drilling or cutting.

Q: How long does installation take?
A: Installation is estimated at approximately 1.5 to 2 hours.

Q: What are these 4Runner rock sliders made from?
A: These sliders are built from 1.75-inch DOM tubing with .120-inch wall thickness seamless construction.

Q: What makes these 4Runner rock sliders strong?
A: These sliders use 1.75-inch DOM tubing, .120-inch wall thickness seamless construction, a full frame plate design, front and rear clamping support, full gusseting, and Grade 8 hardware.

Q: Are top plates included?
A: These Step Edition sliders are available with top plates or no top plates depending on your selected configuration.

Q: How much do these rock sliders weigh?
A: These Step Edition Rock Sliders weigh approximately 45 lbs each, or 90 lbs per pair.

Q: Are these strong enough for hard trail use?
A: Yes. These sliders are designed for demanding off-road use while still offering the option of added daily step usability.