BLACK NOVEMBER SALE 15% OFF EVERYTHING!

Partner Product

LED Footwell Kit Dual Output Front Fits 05-15 Toyota Tacoma

Get the look and feel of a modern luxury vehicle. Footwell lighting gives a sense of spaciousness and comfort while providing illumination to the darkest areas. Adding light to both driver and passenger footwell areas is easy with a VLEDS Tacoma footwell kit!

Dual Output PWM dimmer module allows for two output modes depending on the scenario.

  • COURTESY MODE: Open the door, and the lights are at full output (200LM per side) and fade out with the map and dome light when the door is closed.
  • NIGHT MODE: While driving at night, a soft ambient light adds a sense of spaciousness throughout the cabin. If you want it brighter, use the included screwdriver and turn it up to your liking. The output is factory set to approximately 10LM (the lowest setting). If you want it brighter simply use the included screwdriver and turn it up to your liking.

Plug-n-Play No splicing or tapping into your factory wires! The stock footwell light socket and our plug-in adapter are used to power the two striplight bars and PWM module. With the included fuse tap and ground harness simply plug the tap into the TAIL fuse location under the dash then plug it into the PWM dimmer. For more detailed instructions see the instructions tab.

5X Brighter The striplight bars are small but produce a considerable amount of light compared to cheap, flexible strip lights that are ten times the size. No plastic or fiberglass parts here! The circuit boards are aluminum metal core PCBs housed in a CNC'd aluminum (not cast) body and then finished with a high-quality exterior-grade black anodizing. They not only look amazing, but they will last you for years!

Read More
ON SALE

$117.30 $138.00

5000K NATURAL WHITE 5500K PURE WHITE 6000K COOL WHITE Blue Red
KEY FEATURES
SPECIFICATIONS
WHAT'S INCLUDED

Easy Install Plug and play wiring with our 74 bulb base adapter. Plugs into the factory footwell bulb socket above the emergency brake
Aluminum Beautifully CNC'd all-aluminum body striplight bar with satin black anodized finish
Driver Built-in current limiting resistor and diode protects the strip from reversed polarity installation
Connections Over-molded 2 pin connectors for easier installation and better reliability
Mounting Super-strong 3M double-sided tape and Velcro for mounting
Proprietary 21x 3014 chips mounted to on an aluminum PCB that match all VLEDS LED bulbs

OUTPUT 400LM TOTAL
CURRENT DRAW @ 14.4V 0.5A
OPERATING VOLTAGE 12-18V
LIGHT SOURCE 3014 Proprietary Chip
DRIVER STYLE Resistors

2x BAR_21 LED Bar Light
2x LSE VHB Tape for Smooth Surfaces
1x VLEDS High/Low PWM Dimmer
1x Dimmer LSE Mounting Tape
1x PWM Adjustment Screwdriver
1x 74 Bulb Base Adapter
1x Add a Fuse Tap w/ Ground Harness
1x 4 Foot Wire Extension
8x Small Zip Ties

YOUR RECENTLY VIEWED ITEMS