Talk to an Off-Road Enthusiast
1.888.385.5036
 Chat For Support On Your Order
Black November · 15% off all Cali Raised branded items · Shop now › 15% off Cali Raised · Shop Black November ›

Small Switches

4.8/5 · 1,260+ Google Reviews· 10,000+ Customer ReviewsSee what customers say →

Small-style switches replace the smaller factory switch blanks in the 2005–2023 Tacoma, 2010–2024 4Runner, 2014–2021 Tundra, 2008–2012 RAV4 and 2008–2021 Sequoia. Pick a pre-labeled switch (Light Bar, Ditch Lights, Fog Lights, Rock Lights, Air Compressor and more), the dual-function Amber & White switch, or a blank. 2005–2023 Tacomas can have Small or Tall openings, so check your dash before ordering.

Cali Raised OEM SWITCH fitments

Our OEM switches are made to fit your factory openings for a clean OEM look and feel. Look at the switch size in your vehicle before you place an order to verify fitment

Tall Style
Small Style
Square Style
YEARS YEARS YEARS
Tacoma
Tacoma 2005 - 2023 2005 - 2023 2024+
4Runner
4Runner 2003 - 2009 2010 - 2024 2025+ 4Runner
Tundra
Tundra 2007 - 2013 2014 - 2021 2022+
Rav4
Rav4 2008-2012 2019+
Sequoia
Sequoia 2008 - 2021 2022+
FJ Cruiser
FJ Cruiser 2007-2014
Land Cruiser 300 Series
Land Cruiser 300 Series 2022+
Small / Tall / Square Switch

WIRING CONNECTOR

  • SMALL & TALL WIRING

  • Square WIRING

Small Style Switches: Fitment and Wiring

Small Style is the compact OEM switch body, made to fill the smaller blank openings found across the mid-generation Toyota platforms. It sits flush in the factory opening so an added light bar, ditch light or compressor is controlled from a switch that reads as stock.

Vehicles that take Small Style

  • Toyota Tacoma 2005-2023
  • Toyota 4Runner 2010-2024
  • Toyota Tundra 2014-2021
  • Toyota RAV4 2008-2012
  • Toyota Sequoia 2008-2021

Tacoma 2005-2023 can take either Small or Tall depending on the opening, so check your dash rather than going by year alone. Newer platforms use the Square Style.

Wiring

Four wires: green in from your power source with an inline fuse, red 1 out to your relay to run the accessory, red 2 to the dash light circuit so the symbol dims with your dash, and black as the symbol backlight ground. Electrical connections are required. Wiring connectors are not included; use a suitable connection method for your wiring setup.

Read the Installation Guides

Frequently Asked Questions

Which vehicles do Small Style switches fit?
Small Style fits Toyota Tacoma 2005-2023, 4Runner 2010-2024, Tundra 2014-2021, RAV4 2008-2012 and Sequoia 2008-2021. If your vehicle is newer than these ranges you most likely need the Square Style instead. Confirm the shape of the blank opening in your dash before ordering.
What is the difference between Small, Tall and Square switches?
They are the same switch in three different body shapes, each made to fill a different factory blank opening. The style you need is set by your vehicle and year, not by preference - a Tall switch will not sit correctly in a Small opening. Wiring also differs slightly: Small and Tall switches use a four-wire connector, Square switches use five.
How are Small and Tall switches wired?
Four wires. GREEN connects from your power source with an inline fuse. RED 1 connects to your relay to run the accessory. RED 2 connects to the dash light circuit so the switch symbol lights up with your dash lights. BLACK is the symbol backlight LED ground.
Do these replace the blank switches in my dash?
Yes. They are built to match your factory switch openings so they sit flush and read as OEM rather than an aftermarket add-on. You are filling an existing blank, not cutting new holes.
Are wiring connectors included with the switches?
No. Electrical connections are required. Wiring connectors are not included; use a suitable connection method for your wiring setup.
Will the switch backlight match my factory dash lights?
Yes, when wired as intended. The symbol backlight runs off your dash light circuit - RED 2 on Small and Tall switches, YELLOW on Square switches - so the switch dims and lights with the rest of your dash instead of glowing on its own.
Can I install these myself?
Most owners can. The switch drops into an existing factory opening, and the wiring is four or five clearly labelled wires with a defined job each. You will need a relay for whatever accessory you are running and an inline fuse on the power feed. Our installation resources cover the wiring in detail if you want to read through it before you order.