Fits

2005–2023 Toyota Tacoma

• Compatible years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 Toyota Tacoma
• Compatible generations: 2nd Gen Tacoma and 3rd Gen Tacoma
• Compatible trims: SR, SR5, TRD Sport, TRD Off-Road, Limited, TRD Pro, and other 2005–2023 Toyota Tacoma trims
• Make: Toyota
• Model: Tacoma
• Bed compatibility: Short bed and long bed options available.
• Vehicle compatibility: Designed specifically for 2005–2023 Toyota Tacoma models.
• Older or newer Tacoma compatibility: This rack is designed for 2005–2023 Tacoma models only. For 2024+ Tacoma models, use the compatible 2024+ Tacoma bed rack listing.
• Other vehicle compatibility: Fitment is not guaranteed on any other vehicle unless otherwise specified.

• Installation type: Bolt-on installation.
• Drilling or cutting required: No drilling or cutting required.
• Install difficulty: Easy to moderate installation.
• Estimated install time: Under 2 hours for most DIY installers.
• Hardware included: Yes. Installation hardware is included.
• Instructions included: Installation instructions are available.
• Material: 80% aluminum and 20% steel where strength matters most.
• Finish: Black semi-gloss mini texture powder coat.
• Rack weight: Approximately 55 lbs.
• Rack height options: Low Profile 7-inch, Mid 10-inch, and Tall 17.5-inch.
• Height guidance: Low Profile is best for a lower-profile setup. Mid is a strong choice for rooftop tents. Tall gives the most bed access and storage space underneath.
• Static weight capacity: 1,500 lbs tested, with 750 lbs recommended.
• Dynamic weight capacity: 400 lbs recommended.
• Mounting system: T-slot rails for flexible accessory mounting.
• Accessory compatibility: Designed for rooftop tents, RotopaX, MAXTRAX, recovery boards, awnings, tools, lighting, storage boxes, and other overland gear.
• Made in: Designed, laser cut, and welded in the USA.

• Overland bed rack
  
• Mounting hardware
  

Bed length selected: Short bed or long bed depending on selected option.

Rack height selected: Low Profile 7-inch, Mid 10-inch, or Tall 17.5-inch depending on selected option.

Accessories: Rooftop tents, RotopaX, MAXTRAX, recovery board mounts, awning brackets, lighting, storage boxes, and other accessories sold separately unless otherwise selected or bundled.

Q: Will this bed rack fit my 2005–2023 Toyota Tacoma?
A: Yes. This bed rack is designed specifically for 2005–2023 Toyota Tacoma models.

Q: What Tacoma generations does this rack fit?
A: This rack fits 2nd Gen Tacoma and 3rd Gen Tacoma models from 2005 through 2023.

Q: Does this rack fit both short bed and long bed Tacoma models?
A: Yes. Short bed and long bed options are available.

Q: Does installation require drilling or cutting?
A: No. This rack is designed for bolt-on installation with no drilling or cutting required.

Q: What height option should I choose?
A: Low Profile 7-inch is best for a lower-profile setup. Mid 10-inch is a strong choice for rooftop tents. Tall 17.5-inch gives the most bed access and storage space underneath.

Q: What is the weight capacity?
A: The rack has been tested to 1,500 lbs static capacity, with 750 lbs recommended static capacity. Dynamic weight capacity is 400 lbs recommended.

Q: Can this bed rack support a rooftop tent?
A: Yes. This bed rack is designed to support rooftop tents and heavy overland gear.

Q: What accessories can I mount to this rack?
A: The T-slot mounting system supports rooftop tents, RotopaX, MAXTRAX, recovery boards, awnings, lighting, tools, storage boxes, and other overland accessories.

Q: How much does the bed rack weigh?
A: The rack weighs approximately 55 lbs.

Q: What is included with the rack?
A: This listing includes the overland bed rack and installation hardware.