GIFT CARD

SPEND $100 - Get $15

SPEND $500 Get $75

SPEND $1000 Get $150

SPEND $2000 Get $300

Lead Time: 1-2 Weeks

Anytime backup and front camera Kit Fits 2020+ Toyota Tacoma/4Runner/Tundra

Our Anytime Backup and Front Camera kits allow you to view your rear camera at any time AND add a front-facing camera. The harnesses will plug directly into the back of your factory in-dash screen with no cutting or modification to the factory wires required! Once the harnesses are plugged in, simply connect the wires from the harness to our factory-style switch! The switch is the 'small' OEM Style switch and it features a fully controllable and dimmable backlight.

Read More

$199.99

Included Components:
Compatibility:
HD Camera
Installation Instructions
  • 1x - Anytime Backup Camera Override Harness (Orange and Red Wires)
  • 1x - Anytime Backup Camera RCA video harness (Two Yellow RCA MF and Blue/Gray Wires)
  • 1x - RCA Video switching relay (Three Yellow RCA MFF and Green/Black wires)
  • 1x - OEM Style Single Pole Double Throw (SPDT) Front/Rear Switch with Harness*
  • 1x - Front/Rear-facing Camera
  • 2020+ 4Runner
  • 2020+ Tacoma
  • 2020-2021 Tundra
  • 2020+ Highlander
  • 2019+ Camry


    Note:
  • Our switch is the 'Small' OEM Style Switch for an opening measuring 1.28" X 0.87".
  • This will not fit in the Taller Slim Openings.
  • This kit is designed for 2020+ Toyota vehicles (some 2019s as well). If you have a model with a 360-degree camera system then this will not work for you.

The Premium Camera is offered due to popular demand for a higher quality camera. This camera is made by Natika (A very popular camera sold on Amazon). The camera can be mounted either Vertically or Horizontally which will give you more flexibility when finding a place to mount your camera. The camera also comes with three wedges which will allow you to change the viewing angle of the camera, again giving you more control of your installation.

Vertical Mount

Horizontal Mount

The camera will have three wire loops on the camera wire, Green, White, and Purple. Cutting the wires will do the following:

  • Green - Remove Guidelines
  • White - Mirror Image (For Front Facing applications
  • Purple - Flip Image (For Horizontal mounting)
  • DO NOT CUT the wire loops until you have the camera connected, powered up, and displaying on the screen.

RECENTLY VIEWED ITEMS