Front view of a 2024 underground colored 4Runner with Cali Raised LED front bumper and bull bar installed, with a winch-ready opening .

Close-up of the Cali Raised LED bumper on a 2024 Toyota 4Runner, highlighting the integrated light bar and bull bar.

Side view detail of the Cali Raised LED bull bar showing its snug fit against the front of a 2024 Toyota 4Runner.

Angled front view of a Toyota 4Runner equipped with Cali Raised LED bumper and bull bar, with dual light bar integration.

Toyota 4Runner parked outdoors with Cali Raised LED bumper and bull bar, displaying front-end clearance and off-road stance.

Toyota 4Runner on a trail with a mud-covered Cali Raised LED front bumper, equipped with D-rings and a winch.

Toyota 4Runner navigating rocky terrain with a Cali Raised LED bumper, featuring amber lighting and heavy-duty recovery gear.

Studio shot of the Cali Raised LED front bumper with bull bar, showing clean, symmetrical design and powder coat finish.

Isolated angled view of Cali Raised LED bumper for the Toyota 4Runner, showcasing mounting holes and angular design.

Rear interior view of the Cali Raised LED bumper, revealing the structural winch mount and support reinforcements.

Front view of the Cali Raised LED Stealth Bumper without bull bar, featuring slotted vents, winch cutout, and a black powder coat finish.

Angled rear view of the Stealth Bumper showing internal structure, winch tray integration, and mounting reinforcement.

Back view of the Stealth Bumper highlighting the cross-braced internal support and clean welds for structural integrity.

Three-quarter top-down angle of the Cali Raised LED Stealth Bumper showing detailed cutouts and bolt-on mounting points.

Flat-on rear view of the Stealth Bumper displaying mounting holes, winch access slot, and solid one-piece construction.

Lead Time: 0-4 Weeks

Stealth Front Bumper for 2014-2024 Toyota 4Runner

MPN: CR3761

Upgrade your 2014–2024 Toyota 4Runner with the Cali Raised LED Stealth Bumper, a low-profile front bumper built for trail protection, recovery, lighting, and clean factory-style integration. Designed for 5th Gen Toyota 4Runner owners who want strength without a bulky full-width bumper, this setup improves approach angle while keeping a tight, stealthy profile.

Built with a 3/16-inch steel faceplate and 1/4-inch steel winch plate, this bumper supports most 8,000–12,000 lb winches with a remote-mount solenoid box and a 4.5-inch x 10-inch winch mounting pattern. It is also designed for a 32-inch dual-row LED light bar, mounted cleanly behind the faceplate for a protected, low-profile look.

Built for Trail Protection, Recovery, and Lighting

Every bumper comes black powder coated at no extra charge and includes free shipping. It works with Toyota Safety Sense, TRD skid plates, and most aftermarket skid plates, though it is best paired with Cali Raised skid plates for the cleanest setup. It also includes two 3/4-inch thick recovery points tied to the winch plate and installs with a bolt-on design after trimming the factory plastic bumper.

Key benefits:

Low-profile stealth bumper for 2014–2024 Toyota 4Runner
Designed for trail protection, recovery, and lighting
Compatible with Toyota Safety Sense
Works with TRD skid plates
Works with most aftermarket skid plates
Best paired with Cali Raised skid plates
Winch-ready for most 8,000–12,000 lb winches
Fits a 32-inch dual-row LED light bar
Two 3/4-inch recovery points tied to the winch plate
Black powder coat included at no extra charge
Free shipping included

Shopping for a 5th gen 4Runner? See every 2010-2024 4Runner front bumper and add-on, including the high clearance side wings and license plate mount, or compare all Toyota 4Runner front bumpers.

Before you buy

Other versions: Stealth Bumper for 2025+ 4Runner
Stealth Bumper for 2016–2023 Tacoma
Sold separately: High Clearance Side Wings
License plate mount
Install: ▷ Install video
Install steps on this page
Good to know: Integrated winch plate fits most 8,000–12,000 lb winches with a remote-mount solenoid box.
A light bar is optional and only included when selected.

KEY FEATURES

FITMENT

WHAT’S INCLUDED / ADD-ONS

INSTALLATION / SPECS

FAQ

Low-profile stealth design keeps the bumper clean and tight to the vehicle
High-clearance profile helps improve approach angle for trail use
3/16-inch steel faceplate adds front-end protection
1/4-inch steel winch plate supports recovery-ready builds
Two 3/4-inch thick recovery points are tied to the winch plate
Winch compatible with most 8,000–12,000 lb winches using a remote-mount solenoid box
4.5-inch x 10-inch winch mounting pattern
32-inch dual-row LED light bar ready
Clean hidden light bar mounting behind the faceplate
Available with bull bar or no bull bar
Available with 32-inch spot beam or combo beam light bar options
Compatible with Toyota Safety Sense
Works with TRD skid plates
Works with most aftermarket skid plates
Best paired with Cali Raised skid plates
Black powder coat finish included at no extra charge
Fabricated in-house in Fort Worth, Texas

Fits

2014–2024 Toyota 4Runner

Compatible years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 Toyota 4Runner
Compatible generation: 5th Gen Toyota 4Runner
Compatible trims: SR5, SR5 Premium, TRD Off-Road, TRD Off-Road Premium, TRD Pro, Trail, Trail Premium, Venture Special Edition, Nightshade Special Edition, 40th Anniversary Special Edition, and other compatible non-Limited 2014–2024 Toyota 4Runner trims.
Not compatible with: Toyota 4Runner Limited models.

Compatibility:

Make: Toyota
Model: 4Runner
Vehicle compatibility: Designed specifically for 2014–2024 Toyota 4Runner models.
Toyota Safety Sense compatibility: Yes.
TRD skid plate compatibility: Yes.
Aftermarket skid plate compatibility: Works with most aftermarket skid plates and is best paired with Cali Raised skid plates.

Important fitment notes:

Does not fit Toyota 4Runner Limited models.
Factory plastic bumper trimming is required during installation.
Fitment is not guaranteed on 2010–2013 4Runner, 2025+ 4Runner, Lexus GX, or other vehicles unless otherwise specified.

What’s included:

Cali Raised LED Stealth Bumper
Black powder coat finish
Integrated winch mounting plate
Integrated 32-inch dual-row light bar mounting location
Two 3/4-inch recovery points
Mounting hardware
Installation video resource
Free shipping

Selectable options:

Bull Bar or No Bull Bar
No Light Bar, 32-inch Spot Light Bar, or 32-inch Combo Light Bar
Switch option when applicable

Cali Raised verified add-ons available separately:

High Clearance Side Wings
Stealth Bumper License Plate Mount
SCAR 10S Winch
Warn VR EVO 10-S Winch with Synthetic Rope
Heavy Duty 3/4-inch D-Ring Recovery Shackles

Installation type: Bolt-on design after trimming the factory plastic bumper.
Factory bumper trimming required: Yes
Welding required: No welding required.
Estimated install time: Approximately 3 to 5 hours.
Mounting hardware: All mounting hardware included.
Construction: 3/16-inch steel faceplate with 1/4-inch steel winch plate.
Finish: Black powder coat included at no extra charge.
Winch compatibility: Most 8,000–12,000 lb winches with a remote-mount solenoid box.
Winch mounting pattern: 4.5-inch x 10-inch.
Lighting compatibility: Compatible with a 32-inch dual-row LED light bar.
Recovery points: Two 3/4-inch thick recovery points tied to the winch plate.
Bumper weight: Approximately 77 lbs.
Origin: Fabricated in-house in Fort Worth, Texas.
Shipping: Free shipping included.

Will this bumper fit my 2014–2024 Toyota 4Runner?

Yes. This Stealth Bumper is designed for 2014–2024 Toyota 4Runner models.

Does this bumper fit all 2014–2024 Toyota 4Runner trims?

This bumper fits compatible 2014–2024 Toyota 4Runner models, but it does not fit Toyota 4Runner Limited models.

Does this bumper fit the 4Runner Limited?

No. This bumper does not fit Toyota 4Runner Limited models.

Is this bumper compatible with Toyota Safety Sense?

Yes. This bumper is compatible with Toyota Safety Sense.

Will it work with the front parking sensors and front camera?

Yes. It works with the factory front parking sensors and the front camera, along with Toyota Safety Sense.

Does this bumper work with TRD skid plates?

Yes. This Stealth Bumper works with TRD skid plates.

Does this bumper work with aftermarket skid plates?

Yes. This bumper works with most aftermarket skid plates, but it is best paired with Cali Raised skid plates for the cleanest setup.

Does installation require cutting?

Yes. Trimming of the factory plastic bumper is required for proper installation.

Does installation require welding?

No. This bumper uses a bolt-on design and does not require welding.

How long does installation take?

Installation is estimated at approximately 3 to 5 hours.

How much does the Stealth Bumper weigh?

The bare bumper weighs about 65 lb, without a winch, bull bar or light bar. Add the weight of your winch if you are choosing front springs.

Can I run a winch and light bar at the same time?

Yes. This bumper is designed for both winch and 32-inch dual-row light bar integration.

What winch size fits this bumper?

This bumper supports most 8,000–12,000 lb winches with a remote-mount solenoid box.

What winch mounting pattern does it use?

The winch mounting pattern is 4.5 inches x 10 inches.

What size light bar fits this bumper?

This bumper is designed for a 32-inch dual-row LED light bar.

Is a light bar included?

A light bar is optional and is only included when selected.

Are recovery points included?

Yes. The bumper includes two 3/4-inch thick recovery points tied to the winch plate.

Are the license plate mount, winch, and D-rings included?

No. These are available as Cali Raised verified add-ons and are not included unless selected or added to the order.

Is black powder coating included?

Yes. Every bumper comes black powder coated at no extra charge.

What verified add-ons are available?

Available Cali Raised verified add-ons include the Stealth Bumper License Plate Mount, SCAR 10S Winch, Warn VR EVO 10-S Winch with Synthetic Rope, and Heavy Duty 3/4-inch D-Ring Recovery Shackles.

Are verified add-ons included with the bumper?

Verified add-ons are available separately and are not included unless selected or added to the order.

Are High Clearance Side Wings available for this bumper?

Yes. High Clearance Side Wings are available separately for the 2014–2024 Toyota 4Runner Stealth Bumper. They help add front corner clearance and protection and are not included unless selected or added separately.

Does this bumper include free shipping?

Yes. Free shipping is included.

What if a mounting hole doesn't line up?

There is plenty of adjustment built into the mounting points, so loosen the bolts and shift the part into position before tightening. If a hole still won't line up, contact Cali Raised LED support.

Do I need to trim the TRD skid plate?

No. This bumper officially works with the TRD skid plate with no trimming required.

How do I touch up a chip or scratch in the powder coat?

Clean the area of dust and debris, then spray light, even coats of the Cali Raised LED Touch Up Powder Coat Spray (matte black BK-59, 12 oz). It is made for light to medium scratches on powder-coated surfaces only, not bed liner or raw steel.

Installation

Installation guide for Stealth Front Bumper for 2014-2024 Toyota 4Runner.

Read installation steps

How to Install 2014-2024 Toyota 4Runner Stealth Bumper

Upgrade your 2014–2024 Toyota 4Runner with a rugged Stealth Bumper, designed for enhanced off-road capability and a modern, durable look. This step-by-step installation guide walks you through removing the factory bumper, attaching mounting brackets, securing the new bumper, and reconnecting electrical components. We also cover optional accessory setups, including LED lights and winch installations, to maximize functionality. Perfect for tough trails, this bumper upgrade boosts durability, protection, and mounting options for essential off-road gear. Watch now to transform your 4Runner and take your adventures to the next level!

Recently Viewed

5 stars: 31 (94%)
4 stars: 2 (6%)
3 stars: 0 (0%)
2 stars: 0 (0%)
1 star: 0 (0%)

Easy install, amazing quality, pretty sure this steel is thicker than my ranch hand on my 350

Thanks for the review! Glad to hear the Stealth Bumper was an easy install and that you’re impressed with the quality and construction. We really appreciate you taking the time to share your experience.

Great looking bumper! Looks and

Great looking bumper! Looks and works great with the light bar. The light bar is really bright and very helpful on trails at night. The entire package completely exceeded my expectations. Thanks for all the help!

Easy installation. Looks great. Works

Easy installation. Looks great. Works great. Great quality at a great price.

Fit and finish are great!!

Fit and finish are great!! The light bar is badass. So bright. Love this addition to my rig.

Perfect fit! Absolutely love the

Perfect fit! Absolutely love the look

Great Bumper

Great bumper, super straightforward install, took about 3 hours. Highly recommend getting the light bar it is super bright. Only thing is, it was kind of pain to wire the switch. For anyone wondering the "small switch" fits into one of the blanks and to wire it you connect white to green, both reds to blue, and black to black. Some kind of instructions for that would have been nice but there are some YouTube videos that helped me figure it out.

Awesome bumper!

Bumper is incredibly well-built. Apex Badlands winch fit perfectly. Mounting was easy, but I found the Cali-raised instructional video less detailed than other videos for similar bumpers. I installed the steel bumper first, then the plastic bumper cover which seemed much easier than the way the Cali-raised video showed. My only complaint is a would have liked the mounting holes for the bumper to be smaller. The holes are almost bigger than the factory bolt heads that attach this bumper to the frame. I ended up adding a large washer to a few for a little more peace of mind.

Great bumper though!!!

Stealthy, Stout, and Stylish!!! I

Stealthy, Stout, and Stylish!!! I bought this bumper in late November 2024. It arrived in 2-3 weeks with free shipping. Five months later, May 2025 I finally got around to installing it. Very pleased with the service and how it came packaged. It's very well constructed. I chose this bumper over other options such as CBI, C4, and RCI for the following reasons. While I have RCI sliders, I didn't like the look of it as much. Seemed to harsh on the corners. The C4 is the same cost and no powder coat, and a very long wait. The CaliRaised Stealth is very close in appearance as the CBI but the latter had a long lead time. I liked the the Stealth and light bar could be made as a kit. I liked the idea of the magnetic license plate frame too. I chose the dual row light bar and Warn EVOS10 winch. I clocked the clutch housing to make it easier to operate. The access port is a bit smallish. I put some edge trim in the port to save my skin.

Overall the installation was easy for a DIYer. It took me 8 hours from point of clearing the garage space to walking in the house with it installed, sans light bar wiring, which I did the next day. The CaliRaised install video was very helpful. I also installed alone and it is heavy and takes some ingenuity. I cut the bumper per the video. Perfect!! I installed edge trip on the cut because I wasn't sure how well it would be hidden by the bumper. It's well hidden but still glad I added it.

I also found that the transmission line was much more easily moved away from the winch solenoid than expected. I was very stressed about needing to to that. A little push and it bent the brackets back a bit. The other stressor was the TSS sensor on the grill. It definitely has some pressure on the wiring but not bad. I'd suggest removing the solenoid housing and using a heat gun in the top front middle - just enough heat to push in down a 1/2" or so. Basically a thumb print size depression is all that's needed. I was going to do that before the install but wasn't sure about clearance under the housing, but I'm sure it would be fine.

Unlike the video description, I left the air dams in place. Other install videos for other bumpers show how to cut them, which I think is better/smarter. They are there for a reason - force air into the radiator. So i just trimmed mine. I thought this bumper came with little winglets at the bottom to brace the bottom front corner of the fender but it doesn't. Must be a different bumper that I saw that. Might be a nice touch to add. And while the bumper is advertised as accepting a TRD skid plate, it's actually quite snug. I read on another blog that someone had to trim the front 1"-2' off their skid plate to get it to fit. And this is true. . The plate contacts the bumper before the plate is up against the mount point so the bolts don't have much thread contact. I will need to trim my skid plate.

At the end of the day I'm very pleased with the quality and look of the bumper and light bar. I was a little uncertain if I'd like the dual light bar - in part it's a big slot. But it looks good. I think an issue for all these bumpers is the access port to operate the winch clutch. It is small and could stand to be bigger.

I have to say I'm also really pleased with Cali-Raised customer support. When I call - they answer. This was not the case with CBI. In fact, it may have cost CBI a sale because they only have a chat and email feature.

I would 100% recommend Cali-Raised.

Great bumper!

Excellent quality and easy to install. Bought to go with the full set of skids. Already had the rock rails, so I knew the quality was there.

Looks bad ass USA MADE:u1F1FA::u1F1F8:

Awesome bumper and awesome customer service. Went out of their way to make sure I got what I wanted. Don’t find companies like this anymore. 100% recommend. Added a zeon 10s winch winch and it fit perfectly. Will be buying from this company again

Love the bumper so much!!

Love the bumper so much!!

Loving every minute of it

Loving every minute of it

Fits like a glove, and looks fantastic

Good for what you get, it was super easy to set up, getting it in my rig was also somewhat easy, but I’d recommend a few people, as not to drop it. I bought it looking for a low profile bumper that would allow me to mount a winch, but the room for a light bar is also a massive plus!

This started because I needed

This started because I needed a winch, researching I found other bumpers did not powder coat theirs. I had become aware that Cali came powder coated. The design and fitment is spot on. I got the winch and light bar as well. Shipped fast and customer service is awesome! The only thing holding me back from more stuff from Cali Raised is money LOL. The bumper is strong and well made ! Love It !!!

Solid Bumper/Easy Install

Cali Raised is an awesome company with the best customer service and staff. The bumper is solid, well made and was easy to install. One issue with the bull bar on my bumper is it does not have enough offset/angle. The bull bar touches my factory grill on the horizontal bar. Still looks great and not wanting to take it off I'm good with it, but would have prefered to have a little space between the bull bar and grill. I also bought the Warn winch, light bar and fog lights and very pleased with them. Cali Raised is still my go to shop for my 4Runner.

CR BUMPER

I did not want a lo pro bumper with a bull bar. CaliRaised had the bumper I was looking for. Very stealth and low profile. I had it installed by 88Rotors with a winch and light bar. It looks amazing and did not add that much additional weight to my 4Runner. I don't even notice it's there while driving. This CR bumper is very strong and solid and provides excellent recovery points to my rig. Thank you CaliRaised!

Great Experience

The CR Team was great in helping me get my bumper/light combo and making sure all of my questions were answered. I was able to install it myself and it went fairly according to plan, got a little cut happy lol, but the install videos are pretty straightforward. Love how this turned out and looking forward to hitting some trails but really hoping I don't have to use it.

Perfect fit, Looks sick!

The stealth bumper is the best fit for the 5th gen by a mile than the other guys. Measure twice cut once and this thing is so nice paired with the light bar which is the brightest one Ive ever owned. Kudos Cali raised what’s next? Overall took me by myself 2 1/2 hours to install

The stealth bumper is attractive,

The stealth bumper is attractive, sturdy and relatively easy to install with some plastic trimming. One of the few bumpers that allows the TCSS system to work while having a bull bar. Economical and recieved the bumper quickly and efficiently. A great choice!

I really like this bumper

I really like this bumper I added a winch set up and it was all really nice. Now I did have an issue trying to get it up on my 4Runner even with two people it was kind of a pain and safety thing. Another issue I had was the video on how to install it I ended up not doing any of that. I ended up bolting the bumper on first then the winch and then the plastic of the 4Runner it just seemed easier and safer picking it up with the winch but overall it looks great I love the new capabilities I now have would 10/10 would buy again just wish the video instructions made more sense

Great fit, and looks even

Great fit, and looks even better. .

Bumper is solid af. Install

Bumper is solid af. Install wasn't bad at all. We installed the bumper, winch, and light bar. Just had to rewire the the harness for the oem button. Install isn't bad if you have a buddy or two to help. Cutting the bumper wasn't as bad as i thought it would be. Also, the bumper hides the cuts so you don't have to worry THAT much. No second thoughts. Looks badass.