Stealth Bumper For 2016-2023 Toyota Tacoma

Fits

2016–2023 Toyota Tacoma

• Compatible years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 Toyota Tacoma
• Compatible generation: 3rd Gen Toyota Tacoma
• Compatible trims: SR, SR5, TRD Sport, TRD Off-Road, Limited, Trail Edition, TRD Pro, and other compatible 2016–2023 Toyota Tacoma trims.

Factory compatibility:

• Toyota Safety Sense: Yes, compatible on all model years.
• Factory parking sensors, cameras, and radar: Yes.
• Factory fog lights: Yes.
• TRD Pro grille: Yes.
• Factory TRD Pro skid plate: Yes, no skid plate trimming required.
• Aftermarket skid plates: Works with most aftermarket skid plates and is best paired with Cali Raised skid plates.

Important fitment notes:

• No trim-specific install differences.
• Factory plastic bumper trimming is required during installation.
• Fitment is not guaranteed on 2005–2015 Tacoma, 2024+ Tacoma, or other vehicles unless otherwise specified.

• Installation type: Trim the center section of the factory plastic bumper, then bolt the Stealth Bumper directly to the frame.
• Drilling required: No drilling required.
• Welding required: No welding required.
• TRD Pro skid plate trimming: No trimming required.
• Install difficulty: Light to moderate mechanical skill required.
• Estimated install time: Approximately 2 to 3.5 hours.
• Recommended installers: Two-person installation recommended
• Instructions: Video and PDF installation instructions are available.
• Construction: 3/16-inch steel faceplate with 1/4-inch steel winch plate.
• Finish: Black powder coat included at no extra charge.
• Winch compatibility: Most 8,000–12,000 lb winches with remote-mount solenoid box.
• Winch mounting pattern: (4) 1/2-inch x 10.
• Lighting compatibility: Standard 32-inch LED light bar cutout.
• Light bar brackets: Slotted L-brackets allow installation of Cali Raised LED or other compatible 32-inch light bars.
• Recovery points: Dual 3/4-inch steel recovery points tied directly to the frame mount.
• Bumper weight: Approximately 77 lbs.
• Origin: Made in the USA.
• Shipping: Free shipping included.

What’s included:

• Cali Raised LED Stealth Front Bumper
• Black powder coat finish
• Integrated winch mounting plate
• Integrated 32-inch light bar mounting location
• Slotted L-brackets for light bar installation
• Dual 3/4-inch steel recovery points
• Video and PDF installation instructions
• Free shipping

Selectable options:

• Bull Bar or No Bull Bar
• No Light Bar, 32-inch Spot Light Bar, or 32-inch Combo Light Bar
• Switch option when applicable

Cali Raised verified add-ons available separately:

• High Clearance Side Wings
• Second 32-inch Light Bar with Relocation Mounts
• Stealth Bumper License Plate Mount
• SCAR 10S Winch
• Warn VR EVO 10-S Winch with Synthetic Rope
• Heavy Duty 3/4-inch D-Ring Recovery Shackles

Q: Will this bumper fit my 2016–2023 Toyota Tacoma?
A: Yes. This Stealth Front Bumper is designed for 2016–2023 Toyota Tacoma models and fits every trim level.

Q: What Tacoma trims does it fit?
A: It fits SR, SR5, TRD Sport, TRD Off-Road, Limited, Trail Edition, TRD Pro, and other compatible 2016–2023 Tacoma trims.

Q: Is it compatible with Toyota Safety Sense?
A: Yes. It is compatible with Toyota Safety Sense on all model years.

Q: Will it interfere with factory sensors, cameras, radar, or fog lights?
A: No. It works with factory parking sensors, cameras, radar, and fog lights.

Q: Does it work with the TRD Pro grille and TRD Pro skid plate?
A: Yes. It works with the TRD Pro grille and factory TRD Pro skid plate. No TRD Pro skid plate trimming is required.

Q: Is this a bolt-on bumper?
A: Yes. After trimming the center section of the factory plastic bumper, the Stealth Bumper bolts directly to the frame with no drilling or welding.

Q: How long does installation take?
A: Installation usually takes approximately 2 to 3.5 hours. A second person is recommended.

Q: What size winch fits this bumper?
A: This bumper supports most 8,000–12,000 lb winches with a remote-mount solenoid box.

Q: What size light bar fits this bumper?
A: It is designed for a 32-inch LED light bar and includes slotted L-brackets for Cali Raised LED or other compatible 32-inch light bars.

Q: Is black powder coating included?
A: Yes. Every bumper comes black powder coated at no extra charge.

Q: What verified add-ons are available?
A: Available Cali Raised verified add-ons include High Clearance Side Wings, a Second 32-inch Light Bar with Relocation Mounts, a Stealth Bumper License Plate Mount, SCAR 10S Winch, Warn VR EVO 10-S Winch with Synthetic Rope, and Heavy Duty 3/4-inch D-Ring Recovery Shackles.

Q: Are verified add-ons included with the bumper?
A: Verified add-ons are available separately and are not included unless selected or added to the order.

Q: Does this bumper include free shipping?
A: Yes. Free shipping is included.