VLR-15 TURN SIGNAL PLUG-N-PLAY HYPERFLASH FIX

Exclusive The VLR is by far the cleanest and safest way to add load to any vehicle lighting system. VLR resistors accomplish the same task as a common gold resistor but are easier to install, have a lower profile, and run 50% cooler (250°F MAX).

Construction Using a wire wound resistor potted inside of a black anodized aluminum heat sink, these are the most weatherproof and thermally safe resistors on the market. VLR resistors use high temp silicone wiring attached to a male waterproof circular connector.

Mounting The supplied VLR High Temp mounting tape can be used to adhere the resistor body to a flat, clean metal surface on the vehicle. As an extra precaution: VLR resistors should be mounted out of harm's way and should not touch any plastic or other wiring.

For hardwiring installations, we highly recommended this for a serviceable connection! Using the DuoTap connector, insert both positive and negative wires and squeeze DuoTaps with pliers. It's that easy!

For more information about adding load to your lighting system learn more here.

TECHNICAL SPECS