Step Edition Bolt On Rock Sliders For 2010-2024 Toyota 4Runner

Fits

2010–2024 Toyota 4Runner

• Compatible years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 Toyota 4Runner
• Compatible generation:5th Gen Toyota 4Runner
• Compatibility: KDSS compatible: Yes
• Non-KDSS compatible: Yes
• Make: Toyota
• Model: 4Runner
• Vehicle compatibility: Designed specifically for 2010–2024 Toyota 4Runner models.
• Important fitment notes:
• 2010–2013 4Runners must remove the Rock Trim Panel for sliders to fit properly.
• Not compatible with Limited or TRD Sport models unless the XREAS system and side moldings are removed.
• Not compatible with Lexus GX.
  
  

• Installation type: 100% bolt-on installation.
• Drilling or cutting required: No drilling or cutting required.
• Install difficulty: Easy to moderate installation.
• Estimated install time: Approximately 1.5 to 2 hours.
• Hardware included: Grade 8 hardware included.
• Material: 1.75-inch DOM tubing.
• Wall thickness: .120-inch seamless wall.
• Mounting design: Full frame plate design with front and rear clamping support.
• Construction: Full gusseted rock slider construction.
• Weight: Approximately 45 lbs each / 90 lbs per set.
• Finish options: Raw steel, BK59 powder coating, or polyurethane bed liner spray.
• Top plates: Included on Step Edition.
• Kick out options: Available with kick out or no kick out.
• Raw steel: Best for custom paint or custom finishing
• BK59 powder coat: Clean black finish with strong resistance against scratches, chipping, wear, and fading.
• Polyurethane bed liner spray: Rugged, textured finish with added grip, especially useful on top plate surfaces.
• Warranty: 2-year warranty against manufacturing defects.

Both the Step Edition and Trail Edition are designed for the 2024+ Toyota Tacoma and built as true frame-mounted rock sliders. The main difference is the slider angle and how the truck will be used.

Choose Step Edition if you want:

• A 0-degree flat rock slider
• Better step usability
• Easier entry and exit
• Better footing for kids and passengers
• Easier roof access
• A better setup for daily driving, work trucks, and family use
• Optional top plate configurations
  

Choose Trail Edition if you want:

• A 25-degree angled rock slider
• Better ground clearance
• A tighter-to-body profile
• A more aggressive off-road setup
• A slider built more around technical trail performance
• A lighter slider setup without top plates
  

Quick comparison:

Step Edition is best for daily use, step function, passenger access, and practical protection. Trail Edition is best for added clearance, tighter body fitment, lighter weight, and trail-focused driving.

If your Tacoma is built more for technical terrain, harder trail use, and maximum clearance, the Trail Edition is the better fit. If your truck sees more daily driving and passenger use, the Step Edition may be the better option.

• Driver-side Step Edition rock slider
• Passenger-side Step Edition rock slider
• Top plates ( If selected)
• Grade 8 installation hardware
• Selected slider option: Kick out or no kick out depending on selected option.
• Selected coating: Raw steel, BK59 powder coat, or polyurethane bed liner spray depending on selected option.
  

Q: Will these rock sliders fit my 2010–2024 Toyota 4Runner?
A: Yes. These Step Edition Bolt On Rock Sliders are designed for 2010–2024 Toyota 4Runner models.

Q: What 4Runner generation do these fit?
A: These sliders fit 5th Gen Toyota 4Runner models from 2010 through 2024.

Q: Do these fit KDSS 4Runners?
A: Yes. These sliders are compatible with KDSS-equipped Toyota 4Runners.

Q: Do these fit non-KDSS 4Runners?
A: Yes. These sliders are designed to work with both KDSS and non-KDSS Toyota 4Runners.

Q: What is the Step Edition design?
A: The Step Edition uses a step-friendly profile with top plates, giving you true rock slider protection with a more usable step surface for daily driving, passengers, and roof access.

Q: Are these true rock sliders or just side steps?
A: These are true frame-mounted rock sliders built for rocker panel protection and trail use, not just cosmetic side steps.

Q: Are these bolt-on rock sliders?
A: Yes. These are 100% bolt-on and require no drilling or cutting.

Q: How long does installation take?
A: Installation is estimated at approximately 1.5 to 2 hours.

Q: What makes these 4Runner rock sliders strong?
A: These sliders use 1.75-inch DOM tubing, .120-inch wall thickness seamless construction, a full frame plate design, front and rear clamping support, full gusseting, and Grade 8 hardware.

Q: Are kick out and no kick out options available?
A: Yes. You can choose between kick out and no kick out depending on your preferred look and trail use.

Q: How much do these rock sliders weigh?
A: These Step Edition Rock Sliders weigh approximately 45 lbs each, or 90 lbs per set.

Q: Are these compatible with Limited or TRD Sport 4Runners?
A: These sliders are not compatible with Limited or TRD Sport models unless the XREAS system and side moldings are removed.

Q: Are these strong enough for hard trail use?
A: Yes. These sliders are designed for demanding off-road use while still giving you the everyday usability of a step.