Rock Sliders For 2022+ Toyota Tundra

Fits

2022+ Toyota Tundra CrewMax

• Compatible years: 2022, 2023, 2024, 2025, 2026+ Toyota Tundra
• Compatible generation: 3rd Gen Toyota Tundra
• Cab / bed compatibility: CrewMax 5.5-foot bed

Compatibility:

• Make: Toyota
• Model: Tundra
• Vehicle compatibility: Designed specifically for 2022+ Toyota Tundra CrewMax models.
• Hybrid compatibility: Yes
• Non-hybrid compatibility: Yes
• Trim compatibility: Fits compatible 2022+ Toyota Tundra CrewMax trims.

Important fitment notes:

• Select the correct Hybrid or Non-Hybrid option when ordering.
• Will fit CrewMax 5.5-foot bed models.
• Will not fit CrewMax 6.5-foot bed models.
• Will not fit Double Cab Tundras.
• Fitment is not guaranteed on 2007–2021 Tundra models or other vehicles unless otherwise specified.

• Installation type: 100% bolt-on installation.
• Drilling or cutting required: No drilling or cutting required.
• Install difficulty: Easy to moderate installation.
• Estimated install time: Approximately 1.5 to 2.5 hours.
• Hardware included: Grade 8 hardware included.
• Material: 2.00-inch DOM tubing.
• Wall thickness: .120-inch seamless wall.
• Mounting design: Full frame plate design with front and rear clamping support.
• Construction: Full gusseted rock slider construction.
• Length: Approximately 96.5 inches.
• Weight: Approximately 65 lbs each / 130 lbs per set.
• Hybrid options: Hybrid or Non-Hybrid.
• Finish options: Raw steel, BK59 powder coating, or polyurethane bed liner spray.
• Top plate / filler plate options: No filler plates, raw filler plates, powder coat filler plates, or bed liner filler plates depending on selected option.
• Raw steel: Best for custom paint or custom finishing.
• BK59 powder coat: Clean black finish with strong resistance against scratches, chipping, wear, and fading.
• Polyurethane bed liner spray: Rugged, textured finish with added grip.

These rock sliders are built for Tundra owners who want real protection without giving up usability.

The step-friendly design and available top plate / filler plate options make them more practical for daily driving, passenger access, and getting in and out of a taller truck. That matters for work trucks, family builds, and any Tundra that sees regular use beyond the trail.

At the same time, the construction is built for serious use. With 2.00-inch DOM tubing, .120-inch wall thickness seamless construction, a full frame plate design, front and rear clamping support, and full gusseting, these sliders are designed to handle real trail abuse while still functioning as a practical step.

If you want rock sliders for your 2022+ Toyota Tundra CrewMax that balance strength, protection, and daily usability, this is the setup.

• Driver-side Tundra rock slider
• Passenger-side Tundra rock slider
• Grade 8 installation hardware
  

Selected vehicle option: Hybrid or Non-Hybrid depending on selected option.

Selected slider option: Kick out or no kick out depending on selected option.

Selected slider finish: Raw steel or BK59 powder coat depending on selected option.

Selected filler plate option: No filler plates, raw filler plates, powder coat filler plates, or bed liner filler plates depending on selected option.

Q: Will these rock sliders fit my 2022+ Toyota Tundra?
A: These rock sliders are designed for 2022 and newer Toyota Tundra CrewMax models.

Q: What Tundra generation do these fit?
A: These sliders fit 3rd Gen Toyota Tundra models.

Q: Are these CrewMax only?
A: Yes. These sliders are designed for CrewMax 5.5-foot bed models.

Q: Will these fit a CrewMax 6.5-foot bed?
A: No. These sliders will not fit CrewMax 6.5-foot bed models.

Q: Will these fit Double Cab Tundras?
A: No. These sliders will not fit Double Cab Tundras.

Q: Do these fit hybrid and non-hybrid Tundras?
A: Yes. These sliders are compatible with both hybrid and non-hybrid 2022+ Toyota Tundra CrewMax models. You must select the correct Hybrid or Non-Hybrid option when ordering.

Q: Are these true rock sliders or just side steps?
A: These are true frame-mounted rock sliders built for rocker panel protection and trail use, not just cosmetic side steps.

Q: Do these Tundra rock sliders work as a step?
A: Yes. These sliders are designed with step-friendly usability, and filler plate options are available for added footing.

Q: Are these bolt-on rock sliders?
A: Yes. These are 100% bolt-on rock sliders and require no drilling or cutting.

Q: How long does installation take?
A: Installation is estimated at approximately 1.5 to 2.5 hours.

Q: What are these Tundra rock sliders made from?
A: These sliders are built from 2.00-inch DOM tubing with .120-inch wall thickness seamless construction.

Q: What makes these Tundra rock sliders strong?
A: These sliders use 2.00-inch DOM tubing, .120-inch wall thickness seamless construction, a full frame plate design, front and rear clamping support, full gusseting, and Grade 8 hardware.

Q: How much do these Tundra rock sliders weigh?
A: These Tundra rock sliders weigh approximately 65 lbs each, or 130 lbs per set.

Q: Are these strong enough for hard trail use?
A: Yes. These sliders are designed for demanding off-road use while still providing the everyday usability of a step-friendly slider.

Q: What coating options are available?
A: Available finish options include raw steel, BK59 powder coating, and polyurethane bed liner spray depending on the selected slider and filler plate configuration.