NOTE: If your Tacoma (typically, 2017+) has no storage cubby in the driver-side bed wall. Your molle panel will still work, but the two mounting locations at the bottom will not be used. (Pictures on the page will show a reference)
You can attach any MOLLE-compatible accessories including pouches, tool holders, first aid kits, recovery gear mounts, water bottle holders, fire extinguisher mounts, and more.
No. The Cali Raised LED Bed MOLLE System uses a bolt-on installation with no permanent modifications to your Tacoma bed.
The MOLLE panels mount to the bed side walls and are generally compatible with most soft and hard tonneau covers that do not extend over the bed walls.
The Bed MOLLE System fits all 2005-2023 Toyota Tacoma models with the standard composite bed.
Yes. All Cali Raised LED MOLLE panels come with a black powder coat finish for durability and corrosion resistance.
Seamless fit, strong, durable, and lightweight. Perfect for mounting gear in the bed of your truck so nothing slides around. Easy install and intuitive install.
Works great, gave me more space off the bed. I want to say it does work with SnugTop. There was some maneuvering I had to do to get it to fit but works well.
Easy install. Fits nice. No longer have my gear rolling & sliding around in the bed
The panels themselves look great and fit great, and they arrived much faster than I expected. The coating is visually appealing and didn't take any damage during my clumsy assembly and install but I'm sure the trails will have the final word on that.
I have two gripes about the panels, however, specifically the way the rubber feet assemble. Because the bolts to hold the rubber feet (between panel and bed liner) push through from outside the truck towards the inside of the bed, they stick out. You have a beautiful looking Molle panel but then three stainless steel bolts just...poking out. It ruins the look and, depending on your intended use, could possibly end up creating a snag point.
Second complaint is the driver side back panel (by the tailgate) didn't come with feet. If you look at my second picture, you can see a piece of dense foam I wedged behind it, because without it, it can tippy-tap against the bed liner when you hit bumps. This is because it doesn't have the storage cubby to screw into like the passenger side and just floats free; adding a couple extra rubber feet for this section would have been ideal.
However, I bought these because I joined the Cult of Tacoma for the cool points, and they still add several cool points to the truck. Next addition will be the front Molle piece to mount my reco boards for a few more points and then whatever else I find on this site that appeals to my impulses.
Praise be the Taco!
Really great molle panels system. Heavy duty and I appreciate how it is compatible with my factory tonneau cover
Pretty cool piece of gear - keeps a med bag, jumper cables and a hatchet handy, but out of the way. Super easy to install and very rugged without adding a lot of weight. Will probably get the panel for the driver's side. . .
I purchased the Bed Molle rear panels for my 2017 Tacoma and the fit was perfect. Very easy install. Build quality excellent. I'd encourage you to spring for the Molle accessory nuts (4/side) as need to place from the back side of panels before you install panels to truck bed rails. I added some D-rings and found I can securely mount my Wavian Jerry cans and the Scepter water containers using ratchet straps. Most excellent product.
This is going to last the life of the truck. I’m excited to keep my emergency gear organized while still being able to use the truck bed for work and home projects. I like that the Molle system fits in front of the truck bed rail - that’s why ended up purchasing it. The system is almost self explanatory on install, but the bumpers could use some explanation and/or a different way of install - the end of the bolt sticks out on the side we use - causing a tear point for bags. And the tool clamps should come with hardware. This was a good purchase - Thanks CaliRaised!
Love the Taco panels
Great panels, easy to install and looks cool. I got only the rear bed passenger panel, it’s big enough for a compact shovel and axe.
Love the Tacoma bed Molle system! I highly recommend.
The fit was perfect and the installation was simple.
I will get lots of use out of this system. Very efficient way to secure various items in the bed of the truck.
Thanks.
I installed the full side panels including the extensions. I have a bakflip cover so I needed the ones for that specific mod. They fit great. Instructions are vague at best but it’s pretty self explanatory and a bit of trial and error we’re all I needed. Installed all 4 panels including mounts for some of my gear on a Saturday afternoon.
Great product
Install was easy enough to figure out, and the panel seems very sturdy when attached. Deducted a star due to the hardware pack missing a washer, and the odd choice to have the different mounting bolts use both metric and sae Allen wrenches, seems like the hardware part was an afterthought and just kind of thrown together.
Just as described, perfect fit!
Fits really well and bolts in nice. I use it to hold my fire extinguisher and snow brush/shovel. A bit pricey but good quality
Much more solid than I expected. Holds my gear that includes spare front and rear drive shafts without any vibrations.
Loved it, coating was solid, and the metal was stout. Had to return due to not fitting with the mounts my Snugtop was using on the tail.
easy to install, solid, perfect
Quality
I installed the MOLLE racks on all three sides of my bed. I couldn't be happier. I like to keep my gear organized, secure, and easy to get to. The MOLLE panels check all three boxes. I just finished the Washington Backcountry Discovery Route, and my recovery gear didn't move an inch. Tha panels also allow for instillation of a swing out bed box on the passenger side. I couldn't be happier with my purchase.
Just installed mine this morning. Easy installation as the I spent more of my time moving around hardware from my soft roll up cover then actually installing the panel. I got the double panel driver side system for my '17 Tacoma. Unfortauntely because of the mounting brackets for my bed cover I can't use the smaller, forward most section without getting creative with a drill. That said I'm pretty happy with how it turned out. As advertised.
