Cali Raised · Ships from our Texas Facility

400W Anytime Wiring Harness

MPN:CR2405

This plug-and-play harness is designed to keep the factory inverter at 400W while the truck is in motion without any splicing! That means the inverter won't kick down to 100W and turn off your fridge as soon as you start driving. Simply plug the harness into the factory inverter located under the center console and attach the ground terminal to a nearby bolt. Included in each kit is an optional extension so that you can add another 3-prong outlet in the cab where it is more useful (Outlet not included). Order Toyota p/n 85530-35050-C0 from your local dealer or purchase the complete Outlet Upgrade Kit here. Now you can utilize the factory inverter from the comfort of your cab!

Will work on these models:

2005-2023 Tacoma

2010-2024 4Runner

2007-2014 FJ Cruiser

2022+ Tundra (NON-HYBRID)

Frequently Asked Questions

What is this wiring harness used for?

This relay wiring harness connects your LED lights (light bars, pods, ditch lights) directly to the battery with a relay and fuse for protection, ensuring proper power delivery.

What lights is this harness compatible with?

This harness works with most Cali Raised LED bars, pods, and auxiliary lighting. Check the product listing for specific amperage and connector compatibility.

Does this harness include a switch?

This harness includes an inline switch. For a factory dash switch, add a compatible Toyota OEM-style switch.

Is this a dual-output or single-output harness?

This is a dual leg harness, designed to power two independent lights or two sets of pods simultaneously.

How long is the harness?

Check the product listing for the harness cable length.

Is this waterproof?

Yes. The connectors and relay housing are weather-resistant for off-road use.

Recently Viewed

5 stars: 58 (97%)
4 stars: 2 (3%)
3 stars: 0 (0%)
2 stars: 0 (0%)
1 star: 0 (0%)

It works for 4runner!

This is a good wire harness for 4Runner too! The difference to the instruction video is that 4runner's 120V outlet is in trunk, you will need a tool to open that 120V outlets panel from its bottom and then you'll find the connection. Disconnect the OEM connection then insert this wire harness, there is a bolt inside for your to ground it.

Works Great and simple to install

Install would have taken less than 5 minutes except My tools haven't seen the light of day since retiring (5 years), and had a difficult time locating a 10mm socket. Should have a dozen of them. Didn't have the approved plastic panel tool, but careful usage of a thin putty knife sufficed for the job. Opened from the bottom inside corner side (putty knife was too long to fit from the bottom. Pried out then was able to grab to extract the plastic panel without any damage. The connector itself was a bit tight, but using a small flat blade allowed me to push the lock down to wiggle it past the lock and remove it. I then removed the 10mm bolt, added the grounding wire, and reinstalled using the new harness and retightened the bolt. Only plan on using the one outlet with a chest type refridge from Aldi, so no need for the second cable. Keeping it handy just in case I find a need at a later date. 5 stars for ease of installation and 5 stars since no splicing was required.

Thanks for the detailed review! Glad to hear the 400W Anytime Wiring Harness was quick to install and that the no-splice setup made the job straightforward. We appreciate you sharing your experience and the 5-star feedback.

3rd gen Tundra

Works great on my 2023 Tundra platinum. Easiest install ever, literally no tools and took 5 mins. I got it to run an electric cooler in the bed when traveling and for long distance costco runs.

Amazing - wish i knew about this earlier

5 minutes later and i got all time 400w

now my starlink mounted on my 4runner wont constantly be shutting down

Works great

Works as advertised, maybe would be nice if the jumper portion was about an inch longer, but good product.

10 minute install-Easy mod for

10 minute install-Easy mod for full functionality. Why Toyota reduces wattage while driving makes absolutely zero sense.

Great

Great

Easy peasy plug and play,

Easy peasy plug and play, works great.

Great item Way overpriced and

Great item
Way overpriced and they know it.
Works perfectly easy to install.
Ive purchased mush more elaborate customization harnesses for much less money.
I was asked to do a review by the company

Nice Mod!

Works as indicated! Easy install and no issues!

Works great and Thanks now

Works great and Thanks now I don't have to worry about losing my cold stuff while driving

Easy install on my 07

Easy install on my 07 FJ. Took about 10 mins plug and play.

Just as described, easy installation,

Just as described, easy installation, able to run much more equipment more

Thumbs up!

Easy to install and works as advertised.

Haven’t tried it on the

Haven’t tried it on the trail yet, but it seems to be working as it’s supposed to. Easy install, and I’m as handy as a rock! If I can do it, anyone can!

Second try a charm!

First harness sent did not work. Contacted customer service and they immediately sent another one which works as expected!

Easy installation on ‘23 Toyota Tundra Limited. Just popped off two rear pieces of center console (cup holder and vent/rear outlets), unplugged from inverter, plugged in this harness and closed back up! Now can run my travel fridge/freezer on long trips!

Great wire quality and easy

Great wire quality and easy to install. The perfect solution for my electrical needs

easy to install

easy to install

FedEx lost my alternator charger

FedEx lost my alternator charger that was supposed to keep my EcoFlow Delta 2 topped off. It’s been a month with no resolution, after doing some research, the 400W anytime wiring harness popped onto my radar and has been a huge improvement and stopgap until my alternator charger finally shows up. The wiring harness took 2 minutes to install and works as advertised. I highly recommend.

Very easy modification to do.

Very easy modification to do. Product is plug & play - thats it.

Easy Peasy

Easy installation, works great

Exactly what I needed

Exactly what I needed

This worked great to charge

This worked great to charge my jackery while driving to the next camp spot on my 2022 trd pro hybrid tundra!

Highly recommend ,

Highly recommend ,

2007 Toyota FJ Cruiser: Worked

2007 Toyota FJ Cruiser: Worked perfectly! I had read in a forum of other FJ owners having success with the “400 watt anytime” so i gave it a shot! It was plug and play and one of the easiest mods i’ve done!

Very easy to install. Only

Very easy to install. Only took a few minutes and works great.

Good. Install video could be

Good. Install video could be better.

Plug and play!

Works like it should. Be very careful prying the plastic as it's very easy to break. Once installed, 400 watts of power will be available while driving. Make sure to check electrical system voltage while driving to know what the alternator voltage should be producing before any load. Monitor for warm wiring after extended use. I use a voltage meter USB plugged into cigarette lighter unit to monitor voltage drops. Alternator should be producing 13 + volts while charging the battery. Anything less should be investigated.

4runner puts out a modified

4runner puts out a modified sine power and will be unable to charge any of the ecoflow generator products at the 400w.

Simple installation, plug and play.

Worked great. Easy to install.

Worked great. Easy to install. A tiny bit of instruction or a wiring diagram would have been useful.

Great does what is advertised

Great does what is advertised !

Easy installation

Easy installation

Works for Tundra HYBRID

This 100% works on 22+ Tundra HYBRID. Despite what the listing says, I tested it on my own 24 Pro (hybrid) and verified it stays in 400watts while in gear. I know others who also confirmed the same.