Talk to an Off-Road Enthusiast
1.888.385.5036
 Chat For Support On Your Order
2024+ Toyota Tacoma Level & Lift Kit 2024+ Toyota Tacoma Level & Lift Kit 2024+ Toyota Tacoma Level & Lift Kit 2024+ Toyota Tacoma Level & Lift Kit 2024+ Toyota Tacoma Level & Lift Kit 2024+ Toyota Tacoma Level & Lift Kit 2024+ Toyota Tacoma Level & Lift Kit 2024+ Toyota Tacoma Level & Lift Kit 2024+ Toyota Tacoma Level & Lift Kit

4 Week Lead Time : New Product

2024+ Toyota Tacoma Level & Lift Kit

The Level & Lift Kit combines all three components — the Half Inch Front Top Mount Spacer, the 2" Front Lower Spring Retainer, and the Half Inch Rear Spring Spacer — for 2½" of total front lift and ½" rear on your 2024+ Toyota Tacoma. All components generate lift through coil compression, keeping factory shock length and suspension geometry completely intact throughout.

The 2" lower spring retainer enhances the stance and appearance of your Tacoma; the front top mount pre-loads ½" to counter added front weight like winches and bumpers; the rear spacer counters bed-side weight from bed racks and cargo. A complete system for the Tacoma owner who wants an elevated look and the flexibility to keep building without the front or rear dropping. The 2" lower retainer is trim-specific — select TRD Off-Road or SR / SR5 / TRD Sport / Limited above.

  • Designed for 2024+ Toyota Tacoma — SR, SR5, TRD Off-Road, TRD Sport, Limited
  • 2½" total front lift + ½" rear — enhanced stance, level build-ready setup
  • 2" retainer enhances vehicle appearance | Front top mount counters winch and bumper weight | Rear counters bed weight
  • 2" lower retainer is trim-specific: TRD Off-Road or SR / SR5 / TRD Sport / Limited
  • All components generate lift through coil compression — factory geometry and shock length retained
  • Includes: (2) Half Inch Top Mount Spacers + (2) 2" Lower Spring Retainers + (2) Half Inch Rear Spacers
  • Machined from 6061-T6511 billet aluminum | ASTM B221 certified | ISO Standards
  • Black anodized finish included | Uses factory hardware | No cutting or grinding
  • Made in Texas, USA | Load rating unaffected

📄 Download Installation Guide — 2024+ Toyota Tacoma Lift Kit (PDF)

Read More
NEW

$749.99

See payment options
Product Options
TRD Off-Road SR / SR5 / TRD Sport / Limited
Fits:Toyota Tacoma 2024+
Secure checkout · Shop Pay & all major cards
$749.99
KEY FEATURES
WHAT'S INCLUDED
FITMENT
INSTALLATION / SPECS
FAQ
  • Designed for 2024+ Toyota Tacoma
  • Fits SR, SR5, TRD Off-Road, TRD Sport, and Limited trims
  • 2.5" total front lift + 0.5" rear lift — fully level, maximum lift stance
  • 2.0" lower spring retainer replaces the factory component — not a spacer or collar
  • 0.5" top mount installs between the top hat and coil spring
  • All components generate lift through coil compression — factory geometry and shock length retained
  • Two trim-specific versions for the lower retainer: TRD Off-Road | SR / SR5 / TRD Sport / Limited
  • Complete three-piece bolt-on system — no cutting or grinding
  • Machined from 6061-T6511 billet aluminum
  • ASTM B221 certified | Manufactured to ISO Standards
  • Black anodized finish — included at no extra charge
  • Uses factory hardware — nothing additional required
  • Designed and manufactured in Texas, USA
  • Load rating unaffected — same as factory
  • (2) 0.5" Front Top Mount Spacers
  • (2) 2.0" Front Lower Spring Retainers (trim-specific)
  • (2) 0.5" Rear Spring Spacers

Selected trim: TRD Off-Road or SR / SR5 / TRD Sport / Limited depending on selection.

Fits

2024+ Toyota Tacoma

  • Compatible years: 2024, 2025, 2026, 2027+ Toyota Tacoma
  • Compatible trims: SR, SR5, TRD Off-Road, TRD Sport, Limited
  • Make: Toyota
  • Model: Tacoma
  • Generation: 4th Gen Tacoma (2024+)
  • Drivetrain: Confirmed 4WD models. 2WD fitment not confirmed.
  • Hybrid compatibility: Fits Hybrid ✓
  • Does not fit: Trail Hunter, TRD Pro

⚠️ Trim selection required: TRD Off-Road and SR / SR5 / TRD Sport / Limited require different lower spring spacers. Select the correct trim before adding to cart.

  • Front lift: 2.5" (measured tire to fender)
  • Rear lift: 0.5" (measured tire to fender)
  • Components: 0.5" Top Mount + 2.0" Front Lower Spring Spacer + 0.5" Rear Spring Spacer
  • Material: 6061-T6511 Billet Aluminum
  • Certification: ASTM B221 | Manufactured to ISO Standards
  • Finish: Black Anodized (included at no extra charge)
  • Hardware: Uses factory hardware — none included
  • Installation: Bolt-on. No cutting or grinding required.
  • Alignment: Professional alignment required after installation
  • Load rating: Unaffected — same as factory
  • Made in: Texas, USA
  • Tire clearance: Ideal for 33" equivalents; 35" possible with minor trimming

Q: What does the 2.5" Lift and Leveling Kit include?
A: The complete kit includes two 0.5" Front Top Mount Spacers, two 2.0" Front Lower Spring Spacers (trim-specific), and two 0.5" Rear Spring Spacers — six total pieces. All hardware uses factory bolts; nothing extra is needed.

Q: How is this different from the 2.0" Lift and Leveling Kit?
A: The 2.5" kit adds the 0.5" Front Top Mount Spacer for an extra half inch of front lift — the right choice for maximum tire clearance or adding a winch without the front end dropping.

Q: Will this affect my factory ride quality?
A: These spacers are purpose-built to adjust ride height while maintaining a factory feel. The load rating remains the same as factory. A professional alignment is required after installation.

Recently Viewed

Recently Viewed