What does the Half Inch Rear Spring Spacer do?

It adds ½" (0.5") of lift to the rear of your 2024+ Tacoma by compressing the coil spring. It's designed to counter added weight in the bed — bed racks, a heavy rear bumper, or cargo weight will drop the rear of your truck, and this spacer compensates to keep your stance level.

Can I run this without a front lift?

Yes. The Half Inch Rear Spring Spacer can be run solo to counter added bed weight without changing anything at the front. It's also the rear component in both the Lift Kit and Level & Lift Kit for a complete front-to-rear setup.

2024+ Toyota Tacoma Half Inch Rear Spring Spacer

4 Week Lead Time : New Product

2024+ Toyota Tacoma Half Inch Rear Spring Spacer

The Half Inch Rear Spring Spacer adds ½" (0.5") of rear lift to your 2024+ Toyota Tacoma, designed to counter added weight in the bed. A bed rack, a heavy rear bumper, or cargo weight will drop the rear of your truck — this spacer compensates and keeps your stance level. Run it solo for rear-only correction, or pair it with any of our front options for a complete front-to-rear setup.

Designed for 2024+ Toyota Tacoma — SR, SR5, TRD Off-Road, TRD Sport, Limited
½" (0.5") of rear lift — counters added bed weight from bed racks, bumpers, and cargo
Lift generated by coil compression — factory shock length and geometry fully retained
No trim selection required — fits all compatible trims
Machined from 6061-T6511 billet aluminum | ASTM B221 certified | ISO Standards
Black anodized finish included | Uses factory hardware | No cutting or grinding
Sold as a pair | Designed and manufactured in Texas, USA

📄 Download Installation Guide — 2024+ Toyota Tacoma Lift Kit (PDF)

Fits

2024+ Toyota Tacoma

Compatible years: 2024, 2025, 2026, 2027+ Toyota Tacoma
Compatible trims: SR, SR5, TRD Off-Road, TRD Sport, Limited
Make: Toyota
Model: Tacoma
Generation: 4th Gen Tacoma (2024+)
Drivetrain: Confirmed 4WD models. 2WD fitment not confirmed.
Hybrid compatibility: Fits Hybrid ✓
Does not fit: Trail Hunter, TRD Pro

Lift: 0.5" rear (measured tire to fender)
Material: 6061-T6511 Billet Aluminum
Certification: ASTM B221 | Manufactured to ISO Standards
Finish: Black Anodized (included at no extra charge)
Hardware: Uses factory hardware — none included
Installation: Bolt-on. No cutting or grinding required.
Alignment: Professional alignment recommended after installation
Load rating: Unaffected — same as factory
Made in: Texas, USA
Sold as: Pair

Q: What does the 0.5" Rear Spring Spacer do?
A: It adds 0.5" of lift to the rear of your 2024+ Tacoma to correct factory rake and level your stance. It pairs with any of our front lift options — 0.5", 2.0", or 2.5".

Q: Does the rear spacer fit all 2024+ Tacoma trims?
A: It fits SR, SR5, TRD Off-Road, TRD Sport, and Limited on confirmed 4WD models. It does not fit Trail Hunter or TRD Pro. 2WD fitment is not confirmed.

Q: Do I need the rear spacer if I am only running a front lift?
A: Not necessarily. The rear spacer is most popular paired with the 2.0" or 2.5" front options for a fully level stance. Our Lift and Leveling Kits include both front and rear spacers in one package.

How to Install the 2024+ Toyota Tacoma Half Inch Rear Spring Spacer

You can lift and level a 2024+ Toyota Tacoma without replacing a single strut. All the lift comes from coil compression, so factory shock length and suspension geometry stay exactly as Toyota designed them.

In this video, we walk through the complete install of the Cali Raised LED Lift and Leveling Kit for the 2024+ Toyota Tacoma — front top mount spacer, 2" front lower spring retainer, and rear spring spacer — filmed at Trailmark Auto & Off-Road in Mansfield, Texas.

Installation Resources

YouTube

Install Video
View / Download

PDF Installation

2024+ Toyota Tacoma Half Inch Rear Spring Spacer

Fits

How to Install the 2024+ Toyota Tacoma Half Inch Rear Spring Spacer

Installation Resources

Recently Viewed