Talk to an Off-Road Enthusiast
1.888.385.5036
 Chat For Support On Your Order
2024+ Toyota Tacoma Half Inch Front Top Mount Spacer 2024+ Toyota Tacoma Half Inch Front Top Mount Spacer

4 Week Lead Time : New Product

2024+ Toyota Tacoma Half Inch Front Top Mount Spacer

MPN:CR4459

The Half Inch Front Top Mount Spacer installs between the top hat and coil spring on your 2024+ Toyota Tacoma, compressing the coil to generate ½" (0.5") of front lift while keeping factory shock length and suspension geometry completely intact — none of the drawbacks of traditional spacer-style lifts.

Purpose-built for Tacoma owners adding weight to the front of their build. A winch, a heavy bumper, or a light bar setup will drop the nose of your truck — this spacer pre-loads ½" of lift to counter that and keep your stance where it should be. Run it solo for a subtle lift, pair it with the Half Inch Rear Spring Spacer for a balanced front-to-rear setup, or stack it with the 2" Front Lower Spring Retainer for 2½" of total front lift.

  • Designed for 2024+ Toyota Tacoma — SR, SR5, TRD Off-Road, TRD Sport, Limited
  • ½" (0.5") of front lift — counters added front weight from winches, bumpers, and light bar setups
  • Installs between the top hat and coil spring — not on top of the shock
  • Lift generated by coil compression — factory shock length and geometry fully retained
  • No trim selection required — fits all compatible trims
  • Machined from 6061-T6511 billet aluminum | ASTM B221 certified | ISO Standards
  • Black anodized finish included | Uses factory hardware | No cutting or grinding
  • Sold as a pair | Designed and manufactured in Texas, USA

📄 Download Installation Guide — 2024+ Toyota Tacoma Lift Kit (PDF)

Read More
NEW

$199.99

See payment options
Fits:Toyota Tacoma 2024+
Secure checkout · Shop Pay & all major cards
$199.99
KEY FEATURES
FITMENT
INSTALLATION / SPECS
FAQ
  • Designed for 2024+ Toyota Tacoma
  • Fits SR, SR5, TRD Off-Road, TRD Sport, and Limited trims
  • 0.5" of front lift (measured tire to fender)
  • Installs between the top hat and coil spring — not on top of the shock
  • Keeps factory shock length and suspension geometry completely intact
  • Lift generated by slight coil compression — no geometry compromise
  • All the benefits of lift without the drawbacks of traditional spacer-style lifts
  • Machined from 6061-T6511 billet aluminum
  • ASTM B221 certified | Manufactured to ISO Standards
  • Black anodized finish — included at no extra charge
  • Uses factory hardware — nothing additional required
  • No cutting or grinding required
  • Sold as a pair
  • Designed and manufactured in Texas, USA
  • Load rating unaffected — same as factory

Fits

2024+ Toyota Tacoma

  • Compatible years: 2024, 2025, 2026, 2027+ Toyota Tacoma
  • Compatible trims: SR, SR5, TRD Off-Road, TRD Sport, Limited
  • Make: Toyota
  • Model: Tacoma
  • Generation: 4th Gen Tacoma (2024+)
  • Drivetrain: Confirmed 4WD models. 2WD fitment not confirmed.
  • Hybrid compatibility: Fits Hybrid ✓
  • Does not fit: Trail Hunter, TRD Pro
  • Lift: 0.5" (measured tire to fender)
  • Material: 6061-T6511 Billet Aluminum
  • Certification: ASTM B221 | Manufactured to ISO Standards
  • Finish: Black Anodized (included at no extra charge)
  • Hardware: Uses factory hardware — none included
  • Installation: Bolt-on. No cutting or grinding required.
  • Alignment: Professional alignment required after installation
  • Load rating: Unaffected — same as factory
  • Made in: Texas, USA
  • Sold as: Pair

Q: What does the 0.5" Front Top Mount Spacer do?
A: It adds 0.5" of front lift to your 2024+ Tacoma by installing between the top hat and coil spring and compressing the coil slightly to generate lift. Unlike traditional spacers that sit on top of the shock and change its length and geometry, this design keeps factory shock length and suspension geometry completely intact.

Q: Does this spacer require new hardware?
A: No. The Top Mount Spacer uses your factory hardware — nothing additional is required. No cutting or grinding needed either.

Q: Can I stack this with the 2.0" Front Lower Spring Retainer?
A: Yes. The 0.5" Top Mount Spacer and 2.0" Front Lower Spring Retainer are designed to work together for a combined 2.5" of total front lift. Both are included in the 2.5" Front Lift Kit and 2.5" Lift and Leveling Kit.

Recently Viewed

Recently Viewed