Trail Edition Bolt On Rock Sliders For 2010-2024 Toyota 4Runner
Before you hit the rough terrain, protect your vehicle with a set of Cali Raised LED rock sliders - built to last through the toughest conditions. Guarding the underside of your outfitted off-road vehicle as you adventure in the great outdoors, these rock sliders are custom made to fit your vehicle so you can focus on the trail ahead.
Crafted from American 1.75" DOM tubing, we don't up-charge you for better material or for features like kick-outs. The slider wall thickness is .120" thick. Includes Grade 8 hardware you need for installation.
Choose between kick-out or no-kick out, from RAW, Powder Coat, and Bedliner finishes. More options than any other supplier on the market!
FEATURES:
- 100% bolt-on option, no modification required.
- The finish of choice, mix and match, no rules.
- Easy installation, read our installation instructions or watch the installation video below for a step-by-step guide.
- Crafted by American Welders, professional finishes to protect from any corrosion, with the chosen finish.
- 2010-2013 4Runners must remove Rock Trim Panel for sliders to fit properly.
Cancellation of a slider order will incur a 15% cancellation fee after the order is placed. This is a custom product made specifically for your vehicle and can not be changed. See important information about shipping options.
Read MoreON SALE
Starting At
$800.99
$889.99
Rock Sliders
What's Trail Edition?
Kick-out vs No Kick-out
Bedliner vs Powder Coat vs RAW
Important Notes & Specifications
Shipping Notes
Warranty & Cancellation
- Our trail edition sliders tuck up close at 20 Degrees, to protect your vehicle from damage during your adventuring.
- This is not meant to be a step.
- Our sliders are rated to support the entire weight of the vehicle.
- This option also adds more of a step to access the rear of the vehicle.
KICK-OUT:
- The entire slider at any point can act as a pivot point.
- Our sliders are rated to support the entire weight of the vehicle.
- This option also adds more of a step to access the rear of the vehicle.
- Kick-out protects the backside of your vehicle from getting pinned by pushing the back tire away from an obstacle.
NO KICK-OUT
- No kick-out is great for tighter trails where you don’t plan on using your vehicle as a pivot.
- This is also great general protection to the rocker panel of your vehicle.
- Our sliders are rated to support the entire weight of the vehicle.
RAW:
- The best option for custom paint jobs and or if you have your own ideas for finishing them up!
BEDLINER:
- Bedliner finish has a grip-like texture to aid in creating a non-slip surface. This has a rugged and textured look and feel.
POWDER COAT:
- A powder-coated surface will be more resistant against scratches, chipping, wear, and fading compared to other types of finishes.
NOTE:
- Due to the nature of manufacturing and shipping, there is a possibility of minor defects, discolorations, and imperfections.
- See SHIPPING for more info.
The 4Runner slider is compatible with:
- 10-24 With or without KDSS
The 4Runner slider is non-compatible with:
- NOT compatible with Limited or TRD Sport (Unless XREAS System & Side Moldings are removed)
- NOT compatible with Lexus GX
- NOT compatible with X-REAS suspension components.
Other Important Information:
- 2010-2013 4Runners MUST REMOVE Rock Trim Panel for sliders to fit properly.
- Cancellation of a slider order will incur a 15% cancellation fee after the order is placed.
SPECIFICATIONS:
- Length: 64"
- Wall Thickness: .120”.
- Combined Weight: Approx 100 lbs.
FREE SHIPPING NOTES
As part of our dedication to delivering your orders promptly and efficiently, we strive to reach every corner of the country, including rural areas. However, we must acknowledge that delivering to rural locations comes with challenges like longer travel distances, limited access roads, and a lack of centralized distribution hubs.
In some cases, these challenges may result in higher transportation costs for us, which we will absorb to the best of our abilities. To ensure that we can continue serving you effectively and maintaining the quality of our services, we may need to request additional funds for freight transportation when delivering to remote rural areas or find a distribution hub closest to your location.
Just so you know, this request will be based on the specific circumstances of your order. We want you to know that our goal is to work with you to find the best solution for your situation.
ALASKA & HAWAII
Rock Sliders being sent to Hawaii or Alaska are sent to a freight terminal for pick up only. If needing to deliver directly to your address additional charges will be incurred.
SHIPPING OUTSIDE THE U.S.A.
Your country may require you to pay import fees, customs, broker fees, duties, and/or value-added taxes (VAT). These costs are not included in the live shipping rate quoted during checkout. These potential charges are the sole responsibility of the customer.
While we make every attempt to properly package each product that leaves our facility, on occasion a product does get damaged – a forklift mishap mishandled pallet or box, or a delivery driver who is having a bad day. If this happens please CONTACT US IMMEDIATELY!
We do our best to estimate lead times but these times are estimates and are subject to change due to the influx of orders. If you have a question or need confirmation of a lead time prior to ordering please reach out on our chat.
- Cali Raised LED provides a 2-year warranty on all our products.
- Warranty for sliders is for manufacturing defects only - does not cover trail and riding damage by use.
- Limited warranty on third-party products, contact us directly for details.
Cancellation:
- Cancellation of a slider order will incur a 15% cancellation fee after the order is placed.