{"product_id":"2024-toyota-tacoma-cplt-intake","title":"2024+ Toyota Tacoma CPLT Intake","description":"\u003ch2\u003eUnlock the Full Potential of Your Tacoma\u003c\/h2\u003e\n\u003cp\u003eSpecifically engineered for the 2024+ Toyota Tacoma, the CPLT Intake System replaces restrictive factory components with a high-efficiency design that delivers real-world power gains — on the trail and on the street.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eMaximum Airflow \u0026amp; Power\u003c\/h3\u003e\n\u003cp\u003eBy utilizing an additional opening in the chassis fender area, the CPLT Intake provides your turbocharger with a direct path to fresh air. A larger airbox, high-flow dry filter, and precision-tuned smooth-bore intake tube work together so your engine breathes effortlessly.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUp to \u003cstrong\u003e14 HP and 14 lb-ft of torque\u003c\/strong\u003e at the wheels in back-to-back dyno testing\u003c\/li\u003e\n\u003cli\u003e12%–17% increase in airflow compared to OEM Standard and TRD models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eIndependent Dyno Comparison \u003c\/h3\u003e\n\u003cp\u003eA community-run controlled dyno test compared the Factory airbox, Banks, SXTH Element, and K\u0026amp;N intakes on the same 2024 Tacoma 2.4T, same dyno, same fuel, and same test procedure — with an ECU learning reset between each intake.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePeak wheel horsepower results (stock calibration):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSXTH Element: 244.58 whp\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eBanks: 244.98 whp\u003c\/li\u003e\n\u003cli\u003eK\u0026amp;N: 243.86 whp\u003c\/li\u003e\n\u003cli\u003eOEM Airbox: 234.93 whp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll three aftermarket intakes outperformed the factory airbox by approximately 9–10 whp under controlled conditions. Notably, the SXTH Element intake also demonstrated the most stable fuel trim behavior of the aftermarket options — approximately 10–12% correction vs. 13–14% for Banks — meaning the ECU requires less compensation to maintain commanded fueling.\u003c\/p\u003e\n\u003cp\u003eThe tester's key conclusion: \u003cem\u003e\"These intake systems are all relatively comparable on the stock tune, but they have substantially more potential once paired with proper professional calibration.\"\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.tacoma4g.com\/forum\/threads\/intake-power-gain-comparison-factory-banks-sxth-k-n-%E2%80%94-same-truck-day-dyno-surprising-results.20600\/\" target=\"_blank\"\u003eRead the full independent dyno comparison on Tacoma4G →\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eEngineered for Protection — Backed by Data\u003c\/h3\u003e\n\u003cp\u003eYour engine is an investment that deserves the best possible protection, but you shouldn't have to sacrifice performance to get it. Our engineering team has compiled this data based on rigorous, data-driven filtration testing to show you exactly how our hardware performs in the real world.\u003c\/p\u003e\n\u003cp\u003eOur dry media filters provide \u003cstrong\u003e99% efficiency\u003c\/strong\u003e for normal on-road daily driving and spirited light off-roading.\u003c\/p\u003e\n\u003cp\u003eModern engine air filters must balance two critical characteristics: airflow and filtration efficiency. Using \u003cstrong\u003eISO 5011 \/ SAE J726\u003c\/strong\u003e laboratory testing standards, the SXTH Element filter demonstrated up to \u003cstrong\u003e99.52% filtration efficiency\u003c\/strong\u003e while maintaining low initial restriction at 300 m³\/h airflow. Industry-standard ISO 5011 testing evaluates differential pressure, airflow restriction, and particulate capture under controlled laboratory conditions — allowing for direct comparison between filter designs.\u003c\/p\u003e\n\u003cp\u003eResearch and filtration industry data show that particles at or above approximately \u003cstrong\u003e1 micron\u003c\/strong\u003e are commonly associated with accelerated wear on the intake tract and engine components. Our filter is specifically engineered to capture particles within that critical range.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eInnovation in Every Detail\u003c\/h3\u003e\n\u003cp\u003eOur patent-pending \u003cstrong\u003eQuickSnap Lid\u003c\/strong\u003e uses powerful magnets to secure the airbox cover — no screws, no clips, no hardware vibrating loose. Inspect or swap your filter in seconds.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eTrue Bolt-On Performance\u003c\/h3\u003e\n\u003cp\u003eThe intake tube diameter is meticulously tuned to match factory MAF sensor specifications, ensuring optimal airflow with zero risk of check engine lights and no aftermarket tune required.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-flow dry air filter for maximum airflow\u003c\/li\u003e\n\u003cli\u003e12%–17% airflow increase over OEM Standard and TRD models\u003c\/li\u003e\n\u003cli\u003eQuickSnap magnetic lid for tool-free maintenance\u003c\/li\u003e\n\u003cli\u003eNo tuning required — no check engine light risk\u003c\/li\u003e\n\u003cli\u003eSmoother intake tubing for increased HP and TQ\u003c\/li\u003e\n\u003cli\u003eDurable high-density polymer airbox construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eIntake Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2024+ Toyota Tacoma\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirbox Material:\u003c\/strong\u003e High-density polymer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter Type:\u003c\/strong\u003e High-flow dry air filter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning Required:\u003c\/strong\u003e None\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAverage Gains:\u003c\/strong\u003e Up to 14 HP and 14 lb-ft TQ at the wheels\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SXTH Element","offers":[{"title":"Default Title","offer_id":43977048490026,"sku":"30-15-100","price":377.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1533\/3811\/files\/Tacoma-CPLT.png?v=1768319370","url":"https:\/\/caliraisedled.com\/products\/2024-toyota-tacoma-cplt-intake","provider":"Cali Raised LED","version":"1.0","type":"link"}