- 1x - Anytime Backup Camera Override Harness (Orange and Red Wires)
- 1x - Anytime Backup Camera RCA video harness (Two Yellow RCA MF and Blue/Gray Wires)
- 1x - RCA Video switching relay (Three Yellow RCA MFF and Green/Black wires)
- 1x - OEM Style Single Pole Double Throw (SPDT) Front/Rear Switch with Harness*
- 1x - Front/Rear-facing Camera
Included Components:
Compatibility:
Premium Camera
Installation Instructions
- 2020+ 4Runner
- 2020+ Tacoma
- 2020+ Tundra
- 2020+ Highlander
- 2019+ Camry
Note: - Our switch is the 'Small' OEM Style Switch for an opening measuring 1.28" X 0.87".
- This will not fit in the Taller Slim Openings.
- This kit is designed for 2020+ Toyota vehicles (some 2019s as well). If you have a model with a 360-degree camera system then this will not work for you.
The Premium Camera is offered due to popular demand for a higher quality camera. This camera is made by Natika (A very popular camera sold on Amazon). The camera can be mounted either Vertically or Horizontally which will give you more flexibility when finding a place to mount your camera. The camera also comes with three wedges which will allow you to change the viewing angle of the camera, again giving you more control of your installation.
Vertical Mount
Horizontal Mount
The camera will have three wire loops on the camera wire, Green, White, and Purple. Cutting the wires will do the following:
- Green - Remove Guidelines
- White - Mirror Image (For Front Facing applications
- Purple - Flip Image (For Horizontal mounting)
- DO NOT CUT the wire loops until you have the camera connected, powered up, and displaying on the screen.