FREE SHIPPING

ON ALL PRODUCTS

To The Lower

48 States

LEAD TIME: 0-2 Weeks

43" Amber/White Dual Function LED Bar

Cali Raised LED presents this 43” amber/white dual-function LED bar, blasting the night with an incredible 28,000 lumens. We strive to provide only the highest quality LED lighting at the most affordable pricing around. Fits all makes and models, of any year. Why settle for less than the best when it comes to your off-road equipment? With a rating of more than 50,000 hours, this amber/white LED light bar may just be the last one you’ll ever need. It’s also extremely durable, thanks to an extruded aluminum housing and polycarbonate lenses. We’re so confident in our products, that we provide a 2-year warranty to help protect your investment no matter the roads you travel.

Features

  • Universal - Works with all years, makes, and models.
  • 10W CREE LED.
  • 50,000+ Hr LED Lifespan.
  • Instant On / Off - no warm-up.
  • Over/under voltage protection.
  • Extruded aluminum housing.
  • Durable polycarbonate lens.
  • Integrated thermal management.
  • GORE pressure equalizing vent.
  • Versatile, can wire to independently control amber and white lighting with a combo beam pattern
  • Amber lights are flood beams, and white lights are spot beams.

ADD A CUSTOM DUAL FUNCTION LIGHT BAR WIRE HARNESS!

Read More

$375.00

Dual Function Wire Harness and Tall Dual Function Switch Dual Function Wire Harness and Small Dual Function Switch No Wire Harness and No Switch
What's included?
Specifications
Wiring Your Dual Function Light Bar
Prinsu Roof Rack Notes
All New DUAL FUNCTION LIGHT BAR WIRING HARNESS
Warranty
  • Dual Function LED Lightbar.
  • Mounting bracket and hardware.

NOTE:
These brackets are universal and not vehicle-specific.
HIGHLY recommend purchasing Cali Raised LED vehicle-specific brackets for the best fit on your vehicle.

Choose from 3 options:

  1. One single-leg wiring harness. Wiring with ONE harness will result in ALL the lights being turned off/on at once.
  2. Two single-leg wiring harnesses. Wiring with TWO harnesses will result in the ability to toggle between white only, amber only, and all lights.
  3. No wiring harness, for the pros who have their own wiring in mind.

NOT Included: OEM switch. Hop on over to our switches offering to add an OEM switch of choice to your cart.

  • IP Rating: 68.
  • Watts: 240.
  • LEDs: 24.
  • Lumens: 28,000.
  • 10W CREE LED.
  • 50,000+ Hr LED Lifespan.
  • Instant On / Off - no warm-up.
  • Over/under voltage protection.
  • Extruded aluminum housing.
  • Durable polycarbonate lens.
  • Integrated thermal management.
  • GORE pressure equalizing vent.
  • Versatile, can wire to independently control amber and white lighting with a combo beam pattern
  • Amber lights are flood beams, and white lights are spot beams.

IP RATING: Devices backed by an international standard rating of IP68 are deemed fit enough to withstand dust, dirt, and sand, and are resistant to submersion up to a maximum depth of 1.5m underwater for up to thirty minutes.

  • Based on test conditions for submersion in up to 1.5 meters of fresh water for up to 30 minutes.

Add a Custom Dual Function Light Bar Wire Harness!

If You Want To Wire By Yourself You Will Need:

ONE WIRE HARNESS: Controlling ALL Lights At Once
If you want the full bar to turn on/off at once and not be able to control it separately then you would just need one harness.

The LED Bar will Have 3 Wires On It:
BLACK: Ground
WHITE: Power For The White LED's
GREEN: Power For The Amber LED's

STEPS:

  1. Remove the plug from the harness.
  2. Connect the black wire from the LED bar to the black wire on the harness.
  3. Then combine the green and white wire on the LED bar to connect to the red on the harness.

TWO-WIRE HARNESSES: Controlling Amber & White Lights Independently
If you want to control the amber and white lights separately then you will need 2 harnesses.
With the 2 harnesses, this gives you the ability to run the Amber/White lights individually or all at the same time.

The LED Bar will Have 3 Wires On It:
BLACK: Ground
WHITE: Power For The White LED's
GREEN: Power For The Amber LED's

STEPS:

  1. The harness will have DT Plugs at the end. You will want to remove those plugs as they are not needed.
  2. After the plugs are removed there will be red and black wires exposed. between both harnesses, you will have 2 red wires and 2 black wires.
  3. You will want to connect the 2 black wires together and connect them to the black wire on the LED bar, Then one red to white and the other red to green. That will give you the ability to run the lights independently.

Cali Raised LED Manufactures Prinsu Roof Rack Specific Brackets HERE.

  • You can mount this light bar to a Prinsu roof rack with modification to the wind fairing (may require new mounting brackets).
  • We offer a 42" single row with specific Prinsu mounting brackets under the VEHICLE-SPECIFIC MOUNTING BRACKETS section.

https://www.youtube.com/watch?v=iYduszQCc1M

Cali Raised LED provides a 2-year warranty on all our products. Limited warranty on third party products, contact us directly for details.

Featured Photos and Video

Prinsu Specific - Mouting a Dual Function Light Bar

RECENTLY VIEWED ITEMS